Anywhere you can buy 2 way radios should have them on the shelf.
Might pay to try your local Dick Smith shop or similar. Fairly sure that Jaycar would have them too.
Hey guys,
Im heading over to my brothers tomorrow to install my cb (gme tx3420 remote mount with benelec d-4002 with 5/16" base).
We want to install the antenna via a gutter mount on top of the driver side. My brother told me that the place he went to purchase the gutter mount has to order in it in.
Does anyone know where in Melbourne I could possibly buy off the shelf, or even just a web link to the exact gutter mount that would suit my d2 td5.
Thanks in advanced,
Michael
Anywhere you can buy 2 way radios should have them on the shelf.
Might pay to try your local Dick Smith shop or similar. Fairly sure that Jaycar would have them too.
The normal gutter mounts both generic and GME branded ones don't fit onto D2 gutters. The plastic moulding is too high. you could trim it but.....
Okay so Jaycar do not sell them anymore but I will be calling up Time Plus in Brunswick and ording in a gutter mount that is suppost to mount to my D2 (supposedly, i will confirm monday).
Is that the case mattyg? Are there any mounts available then for D2's?
Yeah unfortunatey, I wanted to gutter mount mine too. Wouldn't fit. All the ones I have seen are the same design- probably from the same factory. If you have a roof rack or crossbars on the roof rails you could mount it there. With either the rack manufactures antenna mount or a mirror mount clamped onto it. Otherwise you could z bracket on bonnet. OR on the roof toward the back is a black bung. If you drop the interior roof lining from the back end you can unscrew this bung and mount an antenna directly on the roof which is what I have done with my fm antenna to replace the ****ty window antenna on the disco. Just depends what you want to do. If you do find a gutter mount that suits, post the details on here for us all.
Thanks for your advice Matt.
I am interested in this roof mount where the black bung. Where about exacly is is?
You say the plastic moulding is too high for D2. How would you suggest trimming it?
What are your thoughts on this:
Ryda Communications - GME MB03 Adjustable Gutter Mount($22.85)
Regards,
Michael
It wont fit unless you trim the plastic. I didn't trim the plastic trim so your guess is as good as mine - probably a sharp stanley knife.... but i personally wouldn't.
As for the bung, stand on the rear bumper and look on the roof. There is a black plastic circle. That is it. But it only suits antennas that require a ground plane.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks