Results 1 to 4 of 4

Thread: Purchasing TD5?

  1. #1
    Join Date
    Mar 2007
    Location
    Ballarat
    Posts
    108
    Total Downloaded
    0

    Purchasing TD5?

    I'm thinking of purchasing a 2000 TD5 auto, (missing my series 1 TDi). It is low K's, 115,000. However it has already had the head gasket done recently, this seems very low K.s for this to occur. I understand it was done correctly, new stretch bolts etc. Service record seems quite good. Do you experienced owners think this could be an ongoing issue, I would hate to purchase it then find a new head is required etc. It is driving very well at the moment.

    Thanks for any advise.

    Andy.

  2. #2
    Join Date
    Jul 2009
    Location
    Lake Macquarie NSW
    Posts
    1,353
    Total Downloaded
    0
    Sounds Ok to me Andy, being a 2000 model it may have had plastic dowels in the head. Assuming the motor had not been cooked, changing the head gasket on the TD5 at intervals can almost be seen as preventative maintenance. Keep it cool and with good coolant and fresh oil.
    Regards
    Robbo

  3. #3
    Join Date
    Mar 2007
    Location
    Ballarat
    Posts
    108
    Total Downloaded
    0
    Robbotd5
    Are the plastic dowels the head locating dowels? are there better replacements available?

    Thanks again.

    Andy

  4. #4
    Join Date
    Jul 2009
    Location
    Lake Macquarie NSW
    Posts
    1,353
    Total Downloaded
    0
    Yes and yes.
    Regards
    Robbo

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!