Thread: TD5 ECU's

Hello Joe

With a Faultmate or similar, the NNN type ECU's can be programmed to any vehicle variant. Just last night I programmed a NNN500020 (manual D2 TD5) to an Auto.

That said, I have yet to see the NNN500250

I have a Nanocom will that do, if so how do I do it?

Does the nanocom works with the Vehicle Explorer software as my MSV2 does?

In other words, can you use the unit to reflash software into your ECU?

Originally Posted by Baben

Does the nanocom works with the Vehicle Explorer software as my MSV2 does?

In other words, can you use the unit to reflash software into your ECU?

No it doesn't use Vehicle Explorer. The Nanocom works as a standalone unit and can reflash without external software.

Does this mean that the Nanocom cannot change the gearbox type on the ECU?

cool, then all you need to do is select the right set of 2 files based on your engine type (EU2 or EU3), vehicle type (D2/Def, man/auto)

So the ECU is out of a D2 TD5 Man, so the car type is correct how do I find or change the gearbox file?

If the nanocom works in the same way as the MSV2, you have no choice but to erase the ECU and program both the vehicle variant and fuel map files anyway

The files only work in pairs, one for the vehicle variant and one for the fuel map depending on market and emissions. If you program the ECU with an incompatible set of files it wont work, but you can erase and reprogram it again.

For instance if you have a 2002 EU3 engine, start with:

NNV001080 (swtnp004) NNS500170 (swdxr004)

please note - this is at your risk, sir! I can't take any responsibility for any consequences whatsoever

Do you have all the file info from nanocom?