Results 1 to 4 of 4

Thread: only 3000 rpm d2a td5

  1. 29th August 2012, 11:05 AM #1
    devo's Avatar
    devo
    devo is offline Fossicker
    Join Date
    Jul 2011
    Location
    Mandurah WA
    Posts
    73
    Total Downloaded
    0

    only 3000 rpm d2a td5

    Hi All

    I recently replaced the fuel pump as it made a screaming noise and then the engine ran rough and I could only get 3000rpm out of it before it died.
    Fuel pump fixed the problem and the pump has never been so quiet.

    Hpppy!!!

    Woe,
    Yesterday I started up after a short stop and the engine was slugish and only 3000rpm. Shut down and restart! all ok.

    Today exactly the same result.
    Start and run sluggish, 3000rpm and a restart and all ok.

    Help please.

    Cheers
    Devo
    Reply With Quote Reply With Quote
  2. 29th August 2012, 11:53 AM #2
    Graeme
    Graeme is offline Swaggie Vendor
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,041
    Total Downloaded
    0
    Check for oil around the engine ecu connectors as oil can migrate from the engine via the injector harness back to the ecu then the oil interferes with sensor signals in the same connector. There are plenty of threads on AULRO for what to do if you do find oil.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa
    Reply With Quote Reply With Quote
  3. 30th August 2012, 10:37 PM #3
    justfishing Guest
    Hello.
    Sounds like you are getting into limp mode really need to plug into a nanocom and see what faults you have, could be a over boost stuck waste gate until you have a look it is a bit hard.
    Ian
    Reply With Quote Reply With Quote
  4. 31st August 2012, 08:36 AM #4
    devo's Avatar
    devo
    devo is offline Fossicker
    Join Date
    Jul 2011
    Location
    Mandurah WA
    Posts
    73
    Total Downloaded
    0

    Problempe Solvered I ho

    Checked wiring loom and connectors, all ok.
    The fault has been intermittent and I had trouble hunting it down. The sound of the pump has been changing ever since I Boughtmy Disco 3 years ago and thought it normal.

    This problem has brought it all to a head,
    Works out that the Pump Relay has had an intermittent problem. Sometimes it doesn't work.
    I had a spare relay and pluged it in and have not had issues since. Tried it out of desparation, seems to have worked.

    Thanks for all the input. Will keep your advice for the future.

    I am now going to buy a Nanocom. Seems they are priceless.

    Cheers
    Devo
    Reply With Quote Reply With Quote
« Would you buy another? | Second Battery in side bin on 5 seater »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!