The 03/04MY Transfer cases had two diff lock switches whereas earlier vehicles had one diff lock switch. If it's a later TC in an earlier car you'll be a harness connector short.
I'm confused about the electrical connections on the transfer box. I have four sensor with electrical connections to be connected to on my transfer box, but my wiring loom only has three connections on it!
Wiring loom:
(photo taken from the rear of the transfer box)
The wiring loom matches these three connectors:
(photo taken from the front of the transfer box)
No connector on the wiring loom for this connector:
(photo taken from the rear of the transfer box)
Two of the connectors (the two on the right side of the second picture) have the exact same plug and wiring colours, any ideas how to identify which connects to which?
The 03/04MY Transfer cases had two diff lock switches whereas earlier vehicles had one diff lock switch. If it's a later TC in an earlier car you'll be a harness connector short.
I'm not aware of my transfer box not being the original one. My vehicle is a 2003 model.
| Search AULRO.com ONLY! | 
    Search All the Web! | 
  
|---|
| 
 | 
 | 
Bookmarks