Results 1 to 3 of 3

Thread: Transfer case

  1. #1
    Join Date
    Sep 2008
    Location
    Alice Springs
    Posts
    163
    Total Downloaded
    0

    Transfer case

    Here's any easy one for those who know and a head scratcher for me.
    Where is the transfer case filler plug on a 2002 TD5 auto?
    I can see a 22mm bolt/plug high up on the passenger side of the case, which I hope is it.
    The only other thing I can see is a 31mm lock nut on the rear face.
    Can I use 80/90 GL5? (the book says 75/90)
    TIA

  2. #2
    Join Date
    Jul 2010
    Location
    Hunter Valley NSW
    Posts
    750
    Total Downloaded
    0
    Look at the drum brake at the back of the transfer case above that to the passenger side its a 25mm round plug with a 1/2 inch square hole. Behind the drum brake cable.

  3. #3
    Join Date
    Apr 2010
    Location
    South East Queensland near the sea...
    Posts
    796
    Total Downloaded
    0
    As Northian says.... Can't miss it. I use Castol Syntrax..
    Check out the Good Oil for oil related threads. Rick 130 has a plethora of good advice on oils...

    Dave
    TRS Chip ,D2a I/c, Silcone Hoses, EMS2, 2" Lift, BFG KM2s, QT Diff Guards, 4X4 DE Guard, Shadow Bar. VRS Winch, LR Light Guards, .50 CDL, Provent 200, Slickrock Disconnects, Rovadrive Sump, G4 Roof Rails, D2a SLABS ECU, APT Sliders.DBA Rotors. ABS Ext.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!