Reply With QuoteFind a good way to take off the original hose clamps?
Have some new worm drives to replace them?
Hi All,
My top hose for the V8 has arrived incountry (PNG) and I intend to do the change later this week.
Any thing I should be aware of for this job? I thought about putting in some Barrs Leaks just for good meassure apart from the OATS coolant!
Cheers Jerry
The MOD Father
Find a good way to take off the original hose clamps?
Have some new worm drives to replace them?
"How long since you've visited The Good Oil?"
'93 V8 Rossi
'97 to '07. sold.
'01 V8 D2
'06 to 10. written off.
'03 4.6 V8 HSE D2a with Tornado ECM
'10 to '21
'16.5 RRS SDV8
'21 to Infinity and Beyond!
1988 Isuzu Bus. V10 15L NA Diesel
Home is where you park it..
[IMG][/IMG]
Thanks for that and it had crossed my mind too.
Cheers, Jerry
AT RESTuse worm drive clamps fitted correctly as mentioned and leave the Barrs leak on the shelf in the shop.
Okay it's in! What's wrong with Barrs Leaks?
Should I take it out?
Cheers, Jerry
The MOD Father
If the cooling system is maintained as you are doing, why do you need it?
"How long since you've visited The Good Oil?"
'93 V8 Rossi
'97 to '07. sold.
'01 V8 D2
'06 to 10. written off.
'03 4.6 V8 HSE D2a with Tornado ECM
'10 to '21
'16.5 RRS SDV8
'21 to Infinity and Beyond!
1988 Isuzu Bus. V10 15L NA Diesel
Home is where you park it..
[IMG]
Preventative maintainance really.
Very hot and humid here, much like Cairns in summer but all year round. Cooling and A/C systems working hard all the time etc on very poor roads.
There would be a real mountain to climb if a HG blew or small leak lead to overheating.
Cheers
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks