Results 1 to 8 of 8

Thread: recommended workshops in perth wa

  1. 5th July 2013, 07:38 PM #1
    blindin
    blindin is offline Master
    Join Date
    Jul 2013
    Location
    perth wa
    Posts
    207
    Total Downloaded
    0

    recommended workshops in perth wa

    Hi, all.
    I am new to here, and as of tomorrow I will have a disco 2 with the 3 amigos, and also some other lights on the dash.
    Can anyone recommend a place to take it, in perth (sor) who can read the codes, or even better if anyone in perth has a code reader who maybe able to help and advise.
    I have read heaps on here, but I guess the first thing is to get the codes read and go from there.
    Can anyone also recommend a decent code reader?
    Thanks in advance. Simon
    Reply With Quote Reply With Quote
  2. 5th July 2013, 09:52 PM #2
    gavinwibrow's Avatar
    gavinwibrow
    gavinwibrow is offline YarnMaster Silver Subscriber
    Join Date
    Oct 2011
    Location
    Fremantle WA
    Posts
    3,839
    Total Downloaded
    0
    Nanocom Evo is excellent for codes, remapping etc and the service from TD5Inside is top class. Where SoR are you - look at this map for someone close who may be able to help. Others will comment on workshops etc
    https://maps.google.com.au/maps/ms'm...9a1b4929&msa=0
    D4 MY16 TDV6 - Cambo towing magic, Traxide Batteries, X Lifter, GAP ID Tool, Snorkel, Mitch Hitch, Clearview Mirrors, F&R Dashcams, CB
    RRC MY95 LSE Vogue Softdash "Bessie" with MY99 TD5 and 4HP24 transplants
    SADLY SOLD MY04 D2a TD5 auto and MY10 D4 2.7 both with lots of goodies
    Reply With Quote Reply With Quote
  3. 7th July 2013, 09:59 AM #3
    brougham
    brougham is offline Master
    Join Date
    Feb 2008
    Posts
    230
    Total Downloaded
    0
    Jordan Rovertech in Bentley. Not cheap, but far and away brilliant techs and service. Kevin knows LR's better than Landrover themselves
    Reply With Quote Reply With Quote
  4. 7th July 2013, 02:20 PM #4
    TD50WA's Avatar
    TD50WA
    TD50WA is offline Master Gold Subscriber
    Join Date
    Mar 2010
    Location
    Perth
    Posts
    506
    Total Downloaded
    0
    I know it's not SOR, but Lifestyle 4WD in Morley is very good as well....Steve is a very accommodating and helpful guy. Worth the effort to see him IMO.

    Cheers
    Kev
    Kev
    2005 TDV6HSE D3
    2006 V8HSE D3
    99 TD5 D2 (Gone)
    97 RR Autobiography original (Gone)
    Reply With Quote Reply With Quote
  5. 7th July 2013, 07:16 PM #5
    Aaron40's Avatar
    Aaron40
    Aaron40 is offline Master
    Join Date
    May 2009
    Location
    Perth Western Australia
    Posts
    436
    Total Downloaded
    0
    Agree, Steve at Lifestyle looks after my D2 and I am extremely happy, no job too hard, goes those extra lengths to make sure you are happy ... highly recommend
    Reply With Quote Reply With Quote
  6. 8th July 2013, 07:41 AM #6
    joe.woods
    joe.woods is offline Master
    Join Date
    Dec 2011
    Location
    Hocking, Perth
    Posts
    120
    Total Downloaded
    0
    Drop Dave Dover a line he's mobile, great mech davedoverlandrovers@gmail.com ...Joe
    Reply With Quote Reply With Quote
  7. 18th July 2013, 08:27 PM #7
    blindin
    blindin is offline Master
    Join Date
    Jul 2013
    Location
    perth wa
    Posts
    207
    Total Downloaded
    0
    thanks for the replies, I have since bought a nanacom, just waiting for it to turn up.
    I bought a few new abs sensors, as when I done a very basic test, by jacking up 1 wheel at a time, 1 of them did not work my speedo, I replaced that sensor, and it still doesn't work, I hope the 3 amigos will be friendly, I have to say I was quite upset when the speedo didn't work after replacing it.
    Thanks Simon
    Reply With Quote Reply With Quote
  8. 21st July 2013, 07:39 AM #8
    blindin
    blindin is offline Master
    Join Date
    Jul 2013
    Location
    perth wa
    Posts
    207
    Total Downloaded
    0
    Update, nanocom here, sensor fault on the one I replaced. Cleared fault and so far ok, I give it a working out to with abs working h/d and t.c going nuts up some tracks.
    Has anyone used Beemer workshop in maddington? I have bought quite a few second hand parts there before, but never had any work done with them.
    Reply With Quote Reply With Quote
« Assessing the condition of TD5 Autos | Plip receiver wires location »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!