Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Rear Bumper Finisher Assembly clips? Part number for replacement?

  1. #1
    Join Date
    Feb 2011
    Location
    Hobart, Tasmania, Australia
    Posts
    3,828
    Total Downloaded
    0

    Question Rear Bumper Finisher Assembly clips? Part number for replacement?

    While reversing in the bush I taped a small tree. Cleaning the vehicle a few days later and the drivers side Rear Bumper Finisher Assembly slipped off. One of the plug clips that secure it in place is broken.

    Had a look in Micro Cat in Discovery Series II 1998-2004 / C BODY & CHASSIS / C01 BODY & CHASSIS, BODY / C01.130 REAR BUMPER ASSEMBLY ( http://lrparts.net.ru/ ) which lists the replacement complete unit, but not the clips?

    My rear trim is still in perfect condition, just need one of the small clip pieces - you can see the broken one in the third picture below and the two good ones in the first two pictures. Any ideas?





  2. #2
    Join Date
    Sep 2008
    Location
    Alice Springs
    Posts
    163
    Total Downloaded
    0

    Ditto

    I am not sure of the rules about posting a supplier name but I had exactly the same issue and bought a pack of 4 or 6 very similar clips from SuperCheap. I think they were Champion brand. They fitted the trim nicely but were just a fraction too tight on the body. I touched them down on a bench grinder and no problems.

  3. #3
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,152
    Total Downloaded
    0
    I just bought 10 from UK on ebay
    Land Rover Part Number : DKP5279L

    from this bloke
    Land Rover Discovery Rear Door Trim Clips 10 | eBay
    Regards Philip A

  4. #4
    Join Date
    Dec 2009
    Location
    Baldivis WA
    Posts
    1,275
    Total Downloaded
    0
    Quote Originally Posted by twr7cx View Post
    While reversing in the bush I taped a small tree. Cleaning the vehicle a few days later and the drivers side Rear Bumper Finisher Assembly slipped off. One of the plug clips that secure it in place is broken.

    Had a look in Micro Cat in Discovery Series II 1998-2004 / C BODY & CHASSIS / C01 BODY & CHASSIS, BODY / C01.130 REAR BUMPER ASSEMBLY ( Landrover Parts Catalog ) which lists the replacement complete unit, but not the clips?

    My rear trim is still in perfect condition, just need one of the small clip pieces - you can see the broken one in the third picture below and the two good ones in the first two pictures. Any ideas?




    The clips are item 9 in the microcat picture.

    Part number DYC10031L
    Last edited by kelvo; 16th July 2013 at 09:38 PM. Reason: Added part number

  5. #5
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,152
    Total Downloaded
    0
    Whoops they were the rear door trim clips. I bought both and just relised the door ones were red.
    These are the correct ones.

    Land Rover Discovery Rear Bumper Corner Bumperette Trim Clips MK 2 DYC10031L | eBay
    Regards Philip A

  6. #6
    Join Date
    Dec 2009
    Location
    Baldivis WA
    Posts
    1,275
    Total Downloaded
    0
    Quote Originally Posted by PhilipA View Post
    I just bought 10 from UK on ebay
    Land Rover Part Number : DKP5279L

    from this bloke
    Land Rover Discovery Rear Door Trim Clips 10 | eBay
    Regards Philip A
    Those are too small for the corner finisher, they are for the inside trim on the back door.

  7. #7
    Join Date
    Dec 2008
    Location
    Beechboro Perth
    Posts
    447
    Total Downloaded
    0

    Auto parts shop

    You can buy them in blister pack as most auto parts shops, I got some from repo.

  8. #8
    Join Date
    Nov 2007
    Location
    On the road.
    Posts
    1,946
    Total Downloaded
    0
    also bought some from supercheap.
    you also need to secure the screw down the side, thats why mine have been left off.

  9. #9
    Join Date
    Feb 2011
    Location
    Hobart, Tasmania, Australia
    Posts
    3,828
    Total Downloaded
    0
    Quote Originally Posted by Yorkie View Post
    you also need to secure the screw down the side, thats why mine have been left off.
    What is the best way to access the screw? Remove the rear bumper?

  10. #10
    Join Date
    Nov 2007
    Location
    On the road.
    Posts
    1,946
    Total Downloaded
    0
    Quote Originally Posted by twr7cx View Post
    What is the best way to access the screw? Remove the rear bumper?
    yes because with the bumper on you cannot access the screw and without the screw the corner piece just falls off.
    if and when i ever do sell mine i will use to silastic on them.

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!