-
24th December 2013, 11:45 PM
#1
Water leak search
I've got a pretty bad coolant leak somewhere, but can't find where!! Hoping for some help.
It's definitely not the radiator or top hoses, but the problem is it's obviously dripping or running onto the belt, and then it's getting sprayed everywhere over the engine and engine bay, making a simple leak detection impossible!
I'm wondering any suggestions of places where the coolant would leak and get onto the belt?
thanks in advance.
Nathan
-
25th December 2013, 12:50 PM
#2
-
25th December 2013, 11:01 PM
#3
Oh yeah sorry.
V8 - 4.6L block rebuild.
-
26th December 2013, 01:37 PM
#4
Take the radiator shroud top off, simple 1turn on the 4 screws, check that the radiator core hasn't developed a small leak and its being sucked around by the fan air.
Other check your water pump for the dribble hole .
Check the front of valley to see if sensor is leaking. Only other hose in the front section is the expansion tank hose to inlet manifold isn't leaking, of the pre fuel wamer at the throttle opening usually leak.
If your using oat it'll high light any area it dribble from, it will usually be a darker pink at the leak.
-
27th December 2013, 02:44 PM
#5
'Twas the pump. Finally pulled my finger out and removed fan and belt. Was easy to see hole with mirror. So off with pump and about to drive to parts shop to get a new one
Not impressed they didn't use a new one when they did the whole 4.6L conversion....
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks