They will easily fit a stock D2. I run 245/75-16 with no problem at all, just have to watch the speed cameras (do you have them in Canada?) as the speedo will slightly under read
hi
can i fit 235/75r16 tires in a 1999 land rover discovery 2 with original suspension?
thanks
They will easily fit a stock D2. I run 245/75-16 with no problem at all, just have to watch the speed cameras (do you have them in Canada?) as the speedo will slightly under read
Interesting size. On what manufacturer is available ?
hi
yep...there is a lots of police! in here you can´t drive fast.
you find this size in cooper at3
CooperTiresCanada - Discoverer A/T3<span class='trademark'>™</span>
thanks
Thanks. I think it's a good size for this car that I do not discard in future. The 245/70/16 is a good option too to do not have lost of performance (gears practically not affected). The 245/75/16 (that fit without issues) are the bigger increment in size on stock suspensions, with a little increment of gears ratio. There is also, the 255/70/16 which some people likes too, and do not require any lift.
hi
One question, i can fit the 235/75r16 in the spare wheel? it fit?
the 245/75r16 fit? the tire don´t touch in the bumper?
for 16 inch tyres (standard diameter is 29 inches)
235/75 (D = 29.88)
255/70 (D = 30.06)
245/70 (D = 29.50)
245/75 (D = 30.47)
D4 MY16 TDV6 - Cambo towing magic, Traxide Batteries, X Lifter, GAP ID Tool, Snorkel, Mitch Hitch, Clearview Mirrors, F&R Dashcams, CB
RRC MY95 LSE Vogue Softdash "Bessie" with MY99 TD5 and 4HP24 transplants
SADLY SOLD MY04 D2a TD5 auto and MY10 D4 2.7 both with lots of goodies
thanks for the measurements, i try to check i think the 235/75R16
it will touch in the bumper it means i can open the back door lol.
the 245 touch is the bumper?
A 235.75x16 will not touch the bumper.
A 255.70x16 will not touch the bumper as that is what I have and I even have a cover around it.
A 245.75x16 may just touch as another poster said.
If you are handy , you can also flip the bracket and easily fit a 245.75x16.
there is also a US company that makes an alloy adjuster which raises the bolt postions for the spare without flipping the bracket.
Regards Philip A
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks