Thread: 1999 discovery 2 heated seat

might be sensor's for if someone is sitting in the seat for the airbags (esp in america where they dont wear seatbelts

I think you will find 1 of the wires are sheathed in yellow, indicating SRS . Lyonsy is correct that there is a sensor for activation of system if seat is occupied. There is manual seats with heaters indicated in RAVE, However they would be easy to spot with the 2 extra switches in the center console! A copy of the RAVE is handy to follow wiring.
In answer to your question can you retrofit heaters, Yes you could as all the wiring is there in a D2, but you would need switches, relays, the heating elements for the back and base of the seats plus pull the covers off to fit. There are also aftermarket systems too that do the same job, but of course you need to know where it all goes.
Cheers Scott

I thought it was for the seat belt pre tensioners. No side airbags so it won't be for them.
Dave.

hi

thanks for the feedback anybody know a link for manual seats installation
heat seats? i try to find in rave but only focus with automatic seats.

thank you

Originally Posted by DI5CO

I thought it was for the seat belt pre tensioners. No side airbags so it won't be for them.
Dave.

Well the seat belt pretensioners are a part of the SRS system They operate in conjunction with the deployment of the bags in an event.
Mine ,2002 disco, have the wires encased in a yellow sheathing. Any wiring in yellow are always associated with SRS.

Originally Posted by schuy1

Well the seat belt pretensioners are a part of the SRS system They operate in conjunction with the deployment of the bags in an event.
Mine ,2002 disco, have the wires encased in a yellow sheathing. Any wiring in yellow are always associated with SRS.

Technically I suppose but as srs is imprinted on the air bag on the dash, I thought that. The seat belts aren't supplemental but yes it works with the airbags.