Thread: front disc brake shrouds

They are attached with little bolts. But you have to remove the brake calliper and brake disc to access them.

yeah , that would be right....a simple fix.

strezleckie track corrugations........

Originally Posted by GregD2

They are attached with little bolts. But you have to remove the brake calliper and brake disc to access them.

Are we talking about the inner shrouds, and are they same as a Defender (TD5)?

If so, mine can be removed without removing the caliper or brake disc. There is a front bracket that bolts up with the steering stop bolts, a slot in the bottom that goes into a tab that comes off the bottom swivel pin bolts, and (I think) another bolt towards the back. **EDIT** On second thoughts, I don't think there was another bolt towards the back...

That's the Defender, so could be different on the Disco.

Originally Posted by ramblingboy42

yeah , that would be right....a simple fix.

strezleckie track corrugations........

If they are as loose as you say they will be cracked.

Flat washer and welder fixes them nicely