- 
	
		
                        
                                
                                        
                                                5th November 2014, 09:44 AM
                                        
                                
                                
                                        
                                                #11
                                        
                                        
                                        
                                
                        
		 
		
	 
	
		
		
		
				
					
					
				
				
		
			
				
					Hi ShaunR,
 
Sierrafery is on the money, changing the main engine loom while expensive is worth doing. I did mine and the engine ran much smoother. Oil in this loom is not the only problem as they do age and break down.
 
Nick
				
			 
			
		 
			
				
			
				
			
			
			
		 
	 
	
	
 
- 
	
		
                        
                                
                                        
                                                5th November 2014, 10:16 AM
                                        
                                
                                
                                        
                                                #12
                                        
                                        
                                        
                                
                        
		 
		
	 
	
		
		
		
				
				
		
			
				
					Being a tightwad I replaced only the injector loom. I cleaned the ECU plug then removed the gasket so oil could drain. Well really you have to remove the gasket before spraying or the solvent swells it up. 
Check the ECU plug every couple of weeks and spray it.
All the injector contacts are at the bottom on a D2 so with the gasket out excess oil just drops out the bottom.
I did mine about 18 months ago and the oil stopped after about 3 months and no problems since .
I have kept my original loom and sealed the plug with araldite, and if I have a problem again I will refit it.
I also soldered the wires from each injector plug and fitted a crimp connector, but found no evidence that the oil comes from the injectors. I MHO it is from the poorly sealed plug.
Regards Philip A
				
			 
			
		 
			
				
			
			
			
		 
	 
	
	
 
- 
	
		
                        
                                
                                        
                                                6th November 2014, 07:00 AM
                                        
                                
                                
                                        
                                                #13
                                        
                                        
                                        
                                
                        
		 
		
	 
	
		
		
		
				
				
					
				
		
			
				
					Thanks all. I will stick with and also replace tha main loom. Expensive but I guess will hopefully make the disco run better overall
				
			 
			
		 
			
				
			
			
			
		 
	 
	
	
 
		
		
		
	
 
	
	
	
	
	
	
	
	
	
	
	
	Tags for this Thread
	
	
	
		
		
		
		
			
				
				Posting Permissions
			
			
				
	
		- You may not post new threads
 
		- You may not post replies
 
		- You may not post attachments
 
		- You may not edit your posts
 
		-  
 
	
	
	Forum Rules
 
			 
		 
	 
 
  
    Search AULRO.com ONLY! 
 | 
    Search All the Web! 
 | 
  
  
  
  
Bookmarks