Results 1 to 6 of 6

Thread: Hand brake problem

  1. 27th November 2014, 10:12 PM #1
    laney's Avatar
    laney
    laney is offline Master Subscriber
    Join Date
    Feb 2013
    Location
    Queensland
    Posts
    669
    Total Downloaded
    0

    Hand brake problem

    Hi all I have a problem with the hand brake in my 02disco I pulled the hand brake on and the cable became tight but then seemed to let go. Now I have no hand brake at all and there is a noise as I drive the car my question is can I break the hand brake cable and is this common. Also if it is the hand brake cable how hard is it to replace and how much are they and cac I still drive the car thanks all.
    Phillip
    Reply With Quote Reply With Quote
  2. 27th November 2014, 11:19 PM #2
    d2dave's Avatar
    d2dave
    d2dave is online now ForumSage Subscriber
    Join Date
    May 2009
    Location
    Tatura, Vic
    Posts
    6,336
    Total Downloaded
    0
    To replace the cable you will need to remove centre console for the top of the cable.

    For the other end you will need to remove the handbrake shoes. This will require the rear tailshaft to be removed to get the brake drum of.

    It will be ok to drive so long as the cable hasn't jammed with the handbrake partly on.
    Dave.

    I was asked " Is it ignorance or apathy?" I replied "I don't know and I don't care."


    1983 RR gone (wish I kept it)
    1996 TDI ES.
    2003 TD5 HSE
    1987 Isuzu County
    Reply With Quote Reply With Quote
  3. 28th November 2014, 01:25 AM #3
    Eevo's Avatar
    Eevo
    Eevo is offline Swaggie Subscriber
    Join Date
    Sep 2012
    Location
    Adelaide Hills
    Posts
    13,383
    Total Downloaded
    0
    this might be a really silly idea, but would it be possible to repair the cable by welding it together or something? might be a bit easier.
    Reply With Quote Reply With Quote
  4. 28th November 2014, 05:38 AM #4
    JDNSW's Avatar
    JDNSW
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,521
    Total Downloaded
    0
    No. It is a stranded steel cable, and welding will spoil the heat treatment - plus you would need to remove the cable to weld it anyway, so it would be a bigger job, even if it could be done.

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol
    Reply With Quote Reply With Quote
  5. 28th November 2014, 07:40 AM #5
    d2dave's Avatar
    d2dave
    d2dave is online now ForumSage Subscriber
    Join Date
    May 2009
    Location
    Tatura, Vic
    Posts
    6,336
    Total Downloaded
    0
    Quote Originally Posted by Eevo View Post
    this might be a really silly idea
    This bit you got right
    Dave.

    I was asked " Is it ignorance or apathy?" I replied "I don't know and I don't care."


    1983 RR gone (wish I kept it)
    1996 TDI ES.
    2003 TD5 HSE
    1987 Isuzu County
    Reply With Quote Reply With Quote
  6. 28th November 2014, 08:43 AM #6
    Pippin
    Pippin is offline Master Subscriber
    Join Date
    Jun 2013
    Location
    Augusta WA
    Posts
    741
    Total Downloaded
    0
    "there is a noise as I drive the car" this is a good reason to not drive until you have the brake drum off and investigate the problem.

    Nick
    Reply With Quote Reply With Quote
« 2001 D2 TD5 Block filling with diesel fuel! | Ignition power that doesn't stop whilst starting »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!