https://www.aulro.com/afvb/images/im...015/02/643.jpg
Printable View
1 hole it is then , bit hard to tell against the background but top right of the photo on the edge of the gasket approx 90 mm down from front of gasket
That be the hole
i cant see any obvious problems with that HG, what am i not seeing?
Cool i thought so thankyou discorevy :) the head moved eevo which is why the head gasket went. The actual gasket did not actually fail. They are a none reusable item as far as im aware anyway even if look fine.
You can usually tell by the imprint left behind by the gasket.Quote:
Originally Posted by Pippin
Well , you could tell if the holes were over the block, which on a TD 5 they are not, sorry Pippin. Nice tryQuote:
Originally Posted by Pippin
Not being one to give up easily I'll have a look in the morning and eat humble pie then if I am wrong.
Humble pie it is for my breakfast discorevy. But I still think I can see a gasket on the 2nd picture down, must be like the Turin Shroud then:D
You may be a mechanical medium , able to envision the torment the gasket suffered in its last few weeks. :D
Heads been checked etc and no cracks :) Attachment 90499
