Removal of ECU

**Pedro_The_Swift** · 18th February 2015, 12:18 PM

I need to get some numbers off the ECU,,
Is the ECU up under the glovebox or behind the kick panel?

and do those panel plugs just lever out???

The last time I took panel plugs was the door card in the D1,,,
and broke them all

**Outback 1** · 18th February 2015, 12:49 PM

yes it is behind the rh kick panel and the plugs unscrew use a coin if you don't have a driver

**Modelsp** · 18th February 2015, 01:32 PM

Also need 10mm socket for plasti nuts
one is up high on the back towards pillar
rear end comes off studs then front is keyed into a slot
sled out towards seat
then take the plugs out from closest to firewall first
if you don't need to then leave them in to get your info
it's a pain in the butt putting them back
cheers
Paul

**CountP** · 18th February 2015, 08:56 PM

Which ecu? On a D2 td5 its next to the battery. The SLABS ecu is up above the glove box.

**Pedro_The_Swift** · 19th February 2015, 06:32 AM

my bad,, maybe I should have said Engine Control Module,,

**Pedro_The_Swift** · 19th February 2015, 04:10 PM

Originally Posted by Outback 1

yes it is behind the rh kick panel and the plugs unscrew use a coin if you don't have a driver

and they did!

can anyone confirm this is an ECM number?
NNW002460004146

TIA!

**gazk** · 19th February 2015, 04:39 PM

Yes, for a high compression 4.0L V8

**Pedro_The_Swift** · 19th February 2015, 04:57 PM

Thanks Gary

Thread: Removal of ECU

Thread Tools

Removal of ECU

Bookmarks

Bookmarks

Posting Permissions