Results 1 to 4 of 4

Thread: Gear lever hangs to the left.

  1. 15th July 2015, 01:45 PM #1
    Bohica's Avatar
    Bohica
    Bohica is offline YarnMaster Subscriber
    Join Date
    May 2015
    Location
    Williamstown, Victoria
    Posts
    3,248
    Total Downloaded
    0

    Gear lever hangs to the left.

    On yet another Td5 I have looked at, the gear lever rests at the far ledft of travel, not between the 3rd and 4th gates. Is this something easy to adjust? (code for cheapish at a mechanic) or does this indicate possible harder issues?

    Thanks

    Bo
    Reply With Quote Reply With Quote
  2. 15th July 2015, 04:38 PM #2
    Roverlord off road spares
    Roverlord off road spares is offline AT REST
    Major part of the heart and soul of AULRO.com
     Vendor

    Subscriber
    Join Date
    Jul 2012
    Location
    Tecoma Vic
    Posts
    9,642
    Total Downloaded
    0
    Sounds like it Could be your bias plate is twisted and the springs are forcing lever to sit to the left.
    Common problem as the bias plate that the springs press against are only a angled bit of pressed metal.

    Easy fix, if it is twisted and torn at the bottom, Straighten it up and then you can run a bead of weld along it to strengthen it .
    When the plate gets real bad it will make gear changing difficult as it misses the "gates"
    Cheers,
    Mario

    R380 bias plate repaired..


    Reply With Quote Reply With Quote
  3. 16th July 2015, 08:37 AM #3
    lewy
    lewy is offline Wizard Silver Subscriber
    Join Date
    Jan 1970
    Location
    darwin
    Posts
    1,502
    Total Downloaded
    0
    Also whilst you are at it with the welder weld the wear grooves in the stick up.I hat that on the lt77,made the stick bind sometimes.Are the springs different on these pretty sure there is some difference on the lt77 long time ago but.
    Reply With Quote Reply With Quote
  4. 16th July 2015, 01:59 PM #4
    Roverlord off road spares
    Roverlord off road spares is offline AT REST
    Major part of the heart and soul of AULRO.com
     Vendor

    Subscriber
    Join Date
    Jul 2012
    Location
    Tecoma Vic
    Posts
    9,642
    Total Downloaded
    0
    Forgot to mention, those bias spring hurt fingers be careful.

    Reply With Quote Reply With Quote
« V8 coil conversion. | Bypassing wastegate actuator.???? »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!