Thread: Coolant at 21 thousand degrees? Nanocom problem.

Hi all.

My nanocom, in instrument mode, will sometimes spazz out and throw numbers like these: Imgur: The most awesome images on the Internet (sorry it is such bad quality - you will get the gist)

You can see the numbers are all over the joint. Battery voltage seems correct, everything else is absurd.

Usually it will correct itself, but sometimes I will get an ECU communication error and the nanocom will shut down or restart.

Why? What is going on?

Thanks all,
Aaron.

I would suspect you have a faulty obd connection, either the plug has a dodgy pin or your nanacom plug is vibrating and moving. Not a rare problem as the under dash connection is not designed to have a connection whilst driving any distance. And the nanacom plug is quite heavey, I found a stickon velcro cable tie to support it helps.
Cheers Scott