I scored a couple from a wrecked disco. Make sure if you go this route, or any other for that matter, that you get matching both ends of the switch and the connector as there are many variants around, plus each is designed to go in a particular spot in the binnacle (but you can get around this by filing off any non matching guides on the sides of each switch).
The left and right hand side switches are also different and won't quite line up if you transpose from one side to the other. Plus the top one has an extended top edge which does not sit well in a lower position, so ideally grab a couple of the second position lower fog light LED version/s.
Then all you have to do is cover over any wrong identifying symbol and add your own identifiers. For my two bottom left additions I just used W for winch isolator and S for drive/spot lights. If you use an LED version for your spots, its possible the light may be visible at night on high beam and drive you nuts. Mine is on the bottom left and hidden by my steering wheel rim, so no problem, and is also a not quite lining up ex cruise control from the right hand side, so an amber colour.
Hope this helps. Gavin
Last edited by gavinwibrow; 29th October 2015 at 12:02 PM.
Reason: typo
D4 MY16 TDV6 - Cambo towing magic, Traxide Batteries, X Lifter, GAP ID Tool, Snorkel, Mitch Hitch, Clearview Mirrors, F&R Dashcams, CB
RRC MY95 LSE Vogue Softdash "Bessie" with MY99 TD5 and 4HP24 transplants
SADLY SOLD MY04 D2a TD5 auto and MY10 D4 2.7 both with lots of goodies
Bookmarks