Results 1 to 5 of 5

Thread: running cable through fire wall

  1. 14th November 2015, 03:24 PM #1
    stevo's Avatar
    stevo
    stevo is offline Wizard Supporter
    Join Date
    Jan 1970
    Location
    Pennant Hills, Sydney
    Posts
    1,415
    Total Downloaded
    0

    running cable through fire wall

    running sensor cables through the fire wall for the tranny temp and amp gauge plus the boost sensor hose and EGT wiring was not looking forward to this then decided to lift the sound deading material above the main Grommet.


    Low and behold there is a large unused grommet just asking to have all manner of stuff poked into it made the job a lot easier.
    disco seriesII mods so far:-bullbar,hyd winch,
    detriot locker,lsd front,C.D.L kit,chipped and bigger intercooler,2" lift,rock sliders, lsd in transfer case, modified auto trans.

    In the event of nuclear war,Disregard this message
    Reply With Quote Reply With Quote
  2. 17th November 2015, 07:17 AM #2
    Pedro_The_Swift's Avatar
    Pedro_The_Swift
    Pedro_The_Swift is offline The MOD Father
    Join Date
    May 2003
    Location
    On The Road
    Posts
    30,031
    Total Downloaded
    0
    and which side is that?
    I also have some grommet poking to do,,
    apparently there is one near the bonnet release.
    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!

    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]
    Reply With Quote Reply With Quote
  3. 17th November 2015, 08:31 AM #3
    schuy1 Guest
    there is also 1 on the drivers side that has a few spare entry points
    Reply With Quote Reply With Quote
  4. 17th November 2015, 08:40 AM #4
    Pedro_The_Swift's Avatar
    Pedro_The_Swift
    Pedro_The_Swift is offline The MOD Father
    Join Date
    May 2003
    Location
    On The Road
    Posts
    30,031
    Total Downloaded
    0
    which side of the box is the pipe outlet to cooler side?
    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!

    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]
    Reply With Quote Reply With Quote
  5. 17th November 2015, 09:26 AM #5
    stevo's Avatar
    stevo
    stevo is offline Wizard Supporter
    Join Date
    Jan 1970
    Location
    Pennant Hills, Sydney
    Posts
    1,415
    Total Downloaded
    0
    The spare unused grommet is right hand side above the main one lift up sound deading material to uncover it, the pipe that is the outlet side of pump is on the left side of trans the return port is the one at the bottom of trans pump.

    The pipes are two different sizes the outlet is 1/2 inch and the return is 12mm tubing
    disco seriesII mods so far:-bullbar,hyd winch,
    detriot locker,lsd front,C.D.L kit,chipped and bigger intercooler,2" lift,rock sliders, lsd in transfer case, modified auto trans.

    In the event of nuclear war,Disregard this message
    Reply With Quote Reply With Quote
« For me bit of an odd problem, Jezza won't start | TD5 EGR Blanking - which kit? »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!