Coolant will rise when too hot and come out overflow when pressure is too great .......obviously.
Gerokent has made the point re: airflow thermo fans but a likely candidate as well is the viscous fan , I'd be checking that . your m+s lights were flashing cause the trans was too hot , if your viscous fan is OK then as previously suggested check for bubbles in expansion tank
another check you can do other than a teekay test is see if the system is pressurising when the engine has been run from cold for a couple of minutes, good luck with it


Reply With Quote
. sometimes, depending on how soft / hot the sand and load carried you can go much lower with the pressures than 18 psi ( yep , even with your d674s ) although its a good starting point if the sand is cold.

Bookmarks