Aha! Had a man look initially and thought the clock, pictures and wall were all part of one piece of furniture like an antique sideboard!!Quote:
Originally Posted by Pedro_The_Swift
Printable View
Aha! Had a man look initially and thought the clock, pictures and wall were all part of one piece of furniture like an antique sideboard!!Quote:
Originally Posted by Pedro_The_Swift
A new headliner maybe?
The size fits.Quote:
Originally Posted by trout1105
It is a roof rack.
Attachment 154495
Attachment 154496
The clamps needs to be attached. There are 2 bolts per leg, and a set of holes between the bolts. I'm putting a 'lock bolt through the holes, just in case it decides to slip down.
Hmm, metal front and rear bars, rock sliders, now the roof rack, what else can I add? Oh yeah, clip things to attach the maxtraks and high lift jack to the roof rack, but what else?
Today the PCV oe the very expensive hose was replaced. This will reduce the oil leaks. The old one was very hard, not flexible and of course, leaky.
Attachment 154536
It is the hose with the silver heat shield.
I see you have a Provent. Did you ditch the factory DCV valve also?Quote:
Originally Posted by Bohica
No, on the list to do. Just need a aprt. a 19mm 90 degree angle.Quote:
Originally Posted by iPom
Just fitted a catch can the same in the same spot, got a plate bent up that bolts between the horn and the crash sensor.
I notice the heat shield is missing?
Thought Leaky sounded a bit noisy in the front when i got home from Adelaide the other day so i thought i would check under the bonnet before i started the gardening. The fan bearing was seized! Got the old one out in a snap following the tutorial on Discovery UK, putting the new one back was another story, even with a blow torch and freezer it wasn't going in easy. Had to take the radiator and intercooler out to get more room for the mallet. Took a lot of work even with the blow torch, needless to say the trailer is still empty and the weeds happily growing at the end of the day. [bigsad]
An ABS plastic irrigation fitting from the big red and shed will do the job.Quote:
Originally Posted by Bohica
