What happened to your Discovery 2 today?

:ttiwwp:

Quote:

---

Originally Posted by jonesfam

SWMBO & I went for a drive to a place called Blue Water on the Bella Creek.
A very bull dusty drive with a couple of difficult creek/gully crossings.
Once on the track we poked along at 20 or less kph. 44 degrees ambient & the Nanacom reported temps between 82 & 97. Ok I suppose since we were hardly moving.
Very pretty spot & no issues.
Jonesfam

---

:ttiwwp:
I'm homesick. [bigsad]

Quote:

---

Originally Posted by V8Ian

:ttiwwp::ttiwwp:I'm homesick. [bigsad]

---

I will see what I can do a bit later. :)

Attachment 156542

Blue Water

Put the turbo heatshield back on.

Why it hides the little hose

My 1999 Discovery 2 now has CDL chimes, and more....

Today i upgraded my SLABS ECU to the version that LR fitted when they re-instated the Center Diff Lock selector in the facelift D2a. Now the TC / HDC / ABS in my early D2 work the way they should when the CDL is enabled, and i have chimes when the CDL is enabled / dis-abled.
Thank you to OFFTRACK for his “how to” guide for this upgrade.
NB: My CDL selector is a custom air ram actuator.
YouTube

I suspect that my HUNTER Di Speedo Correction Unit installation is clashing with ACE so I re-routed the Road Speed Signal so that an uncorrected RRS is restored to the ACE ECU.
Many thanks to Sierrafery for suggesting the solution in an AUGUST 2014 post - SEARCH is your friend[emoji6]

Changed left hand rear door lock actuator dropped the door handle rod. 😡 Knew that inspection camera i got from aldi would come in handy one day managed to retrieve it . Got lock in then outside door handle will not open door, adjust lock with hex key all good now😊

Quote:

---

Originally Posted by onebob

I suspect that my HUNTER Di Speedo Correction Unit installation is clashing with ACE so I re-routed the Road Speed Signal so that an uncorrected RRS is restored to the ACE ECU.
Many thanks to Sierrafery for suggesting the solution in an AUGUST 2014 post - SEARCH is your friend[emoji6]

---

Did you have the SCU wired in straight out of the SLABS computer?

Quote:

---

Originally Posted by Slunnie

Did you have the SCU wired in straight out of the SLABS computer?

---

Yes .. the SCU is mounted close by to the SLABS and the SCU input wire is spliced in 20mm or so after the speed signal wire exits the relevant SLABS connector.