What happened to your Discovery 2 today?

Quote:

---

Originally Posted by AK83

I only had my spare to try ...
here are the pics of each.

My 99 v8 TCU code is UHC 100 230(now in the TD5)
Attachment 173931

My TD5's controller is a IGG 100 010
Attachment 173932

I have no idea what the markings in blue equate too. I suspect another computer was changed by a previous owner .. like Philip commented .. it seems to be a 'bitsa'!

---

Definitely a 'Bitsa' !!

The numptys that changed out the trans controller in the past stuffed that up nicely!

If yours really a '02 model then it should it should have a EU3 engine? In that case it should have had a IGG 000 070 in it.

Anyway, IGG 100 010 was fitted to VIN XA232917 - 1A719639. The EU3 IGG 000 070 to all post VIN 1A719639.

If you want to try out a IGG 000 070 controller I have a couple of spares here. One was for initial trialling purposes and one came with my
'new' trans w/HD torque Converter.

PM me if required...

Quote:

---

Originally Posted by Bluetoes

I posted this before I saw your post with the pic of the finished wrapping,looks good by the way I’m likening the ss manifold

---

The first one seemed alright until I had done the third one, you do get better at it, hence returning to the first pipe. Should mention that I purchased the Titanium wrap off Amazon and thought they had ripped me off. Had the same number but nothing else. Got in contact with the company and they showed me the wrap they send to Amazon which was the same as received. This is the one that does not have to be wet to apply, but it does unravel quickly. It does seem a shame to wrap the pipes, they are gorgeous and were a wonderful piece of art in the lounge room until this week.

So the next stage of the EWP install was to remove the impellor, 10 minutes with a dremel and off (no way it was going to come off elsewise I can assure you), cleaning and readying it for install. Frustration not being able to go the shop and look for a suitable pipe for the EWP to the engine.

Attachment 173940

Attachment 173941

In preparation for making a shroud for the Davies Craig 16" fan (the BIL has built these before and has a great setup with his 80 series with a 6.2 V8), removed the return pipe from below the radiator for a bit of room.

Attachment 173942

He has a ford twin fan available if needed but we decided to try the DC first and then see if we have to, going the twin fan way.

Have to wait till Monday to get the front end parts -chain guide etc.

Quote:

---

Originally Posted by mylesaway

Definitely a 'Bitsa' !!

The numptys that changed out the trans controller in the past stuffed that up nicely!

If yours really a '02 model then it should it should have a EU3 engine? In that case it should have had a IGG 000 070 in it.

Anyway, IGG 100 010 was fitted to VIN XA232917 - 1A719639. The EU3 IGG 000 070 to all post VIN 1A719639.

.....

---

That kind'a makes sense going by the BCU VIN too.
I'd say a previous owner went full on Hunt for Red October with it, probably drowned out all the ECUs or something and then changed those ECUs.

BCU vin was in the YA and some numbers range, which from memory is about an '00 model.

Can't believe it's finally here!! GTB 550 from Alivehttps://uploads.tapatalk-cdn.com/202...333214211d.jpghttps://uploads.tapatalk-cdn.com/202...7c3ff199b6.jpghttps://uploads.tapatalk-cdn.com/202...667caea266.jpghttps://uploads.tapatalk-cdn.com/202...e30ed257a6.jpghttps://uploads.tapatalk-cdn.com/202...116dd7c2a3.jpg

Quote:

---

Originally Posted by Kaaaiju

Can't believe it's finally here!! GTB 550 from Alivehttps://uploads.tapatalk-cdn.com/202...333214211d.jpghttps://uploads.tapatalk-cdn.com/202...7c3ff199b6.jpghttps://uploads.tapatalk-cdn.com/202...667caea266.jpghttps://uploads.tapatalk-cdn.com/202...e30ed257a6.jpghttps://uploads.tapatalk-cdn.com/202...116dd7c2a3.jpg

---

Bit excited?

Definitely

Quote:

---

Originally Posted by shack

Bit excited?

---

Nice..[emoji16][emoji16][emoji16]

Quote:

---

Originally Posted by Kaaaiju

Definitely

---

How much horsey power are you trying for? [emoji3]

260 plus 580nm

Quote:

---

Originally Posted by SPROVER

How much horsey power are you trying for? [emoji3]

---

Quote:

---

Originally Posted by Kaaaiju

260 plus 580nm

---

That will be awesome to see and hear. [emoji16][emoji106]