Thread: arb bull bar

Originally Posted by loanrangie

OP is asking about a non winch compatible bar, ie one without the opening for the cable or access to a winch.
His bar will need to be cut and likely add bracing to it.

But Bohica (As quoted in my post) was asking to post pics and asking what winches had been fitted. He has a D2a which ARB only do a winch compatible bumper

Yes, you can, it is quite easy if you know how to weld.

Use 40x5mm flat bar to brace the bar, add a strip across the bottom, where the vertical face is folded into the return at the bottom of the bar, and weld in two uprights to pick up the winch bolts and fairlead.

Alternatively install a cradle behind the bar, and just mount the fairlead to the bar.

There is a helluva lot of misinformation already in this thread, let those that have done it do the talking

Originally Posted by MR LR

There is a helluva lot of misinformation already in this thread, let those that have done it do the talking

Considering how short this thread is, apart from post number three, what other misinformation is in this thread?