Reply With QuoteJust replaced my front rotors and pad's, got them thru Burson's at trade so good price, DBA rotors and Bendix 4WD pad's, and flushed the fluid too, pretty blue Bendix fluid so easy to see the change. Pedal feels solid now.
PeterN
Wizard
SupporterWell time to do my brakes, replacing the rotors got these from rapid Rs along with the pads, going to overhaul the calipers replacing the seals and Pistons along with the caliper slides.
I have gotten about 180 K out of current DBA rotors but they are stuffed now so time to get the brakes right again.
I had to replace the master cylinder a few weeks ago as it was by passing I suspect one of the little check valves inside the piston was leaking as the cups were in good knick.
After that project will do the suspension bushes next month as rear rubber bushes are knackered
disco seriesII mods so far:-bullbar,hyd winch,
detriot locker,lsd front,C.D.L kit,chipped and bigger intercooler,2" lift,rock sliders, lsd in transfer case, modified auto trans.
In the event of nuclear war,Disregard this message
Master
SupporterJust replaced my front rotors and pad's, got them thru Burson's at trade so good price, DBA rotors and Bendix 4WD pad's, and flushed the fluid too, pretty blue Bendix fluid so easy to see the change. Pedal feels solid now.
PeterN
Wizard
SupporterAll the parts for the front calipers the tube of brake caliper grease to lube up the pins I have tried other types of grease none seems to last.
disco seriesII mods so far:-bullbar,hyd winch,
detriot locker,lsd front,C.D.L kit,chipped and bigger intercooler,2" lift,rock sliders, lsd in transfer case, modified auto trans.
In the event of nuclear war,Disregard this message
Wizard
SupporterWell finished the front but must have pinched a seal on left caliper, it was the hard side to put together for some reason both Pistons were hard to get into place so will have to chase up some seals.
disco seriesII mods so far:-bullbar,hyd winch,
detriot locker,lsd front,C.D.L kit,chipped and bigger intercooler,2" lift,rock sliders, lsd in transfer case, modified auto trans.
In the event of nuclear war,Disregard this message
Wizard
SupporterI got a kit from Karcraft the original TWR kit looking at the boots there is slight differences which is enough to cause grief will post up pics on Saturday, the first kit was an allmakes kit.
disco seriesII mods so far:-bullbar,hyd winch,
detriot locker,lsd front,C.D.L kit,chipped and bigger intercooler,2" lift,rock sliders, lsd in transfer case, modified auto trans.
In the event of nuclear war,Disregard this message
The MOD Father
So TWR = good
the other not so?
"How long since you've visited The Good Oil?"
'93 V8 Rossi
'97 to '07. sold.
'01 V8 D2
'06 to 10. written off.
'03 4.6 V8 HSE D2a with Tornado ECM
'10 to '21
'16.5 RRS SDV8
'21 to Infinity and Beyond!
1988 Isuzu Bus. V10 15L NA Diesel
Home is where you park it..
[IMG][/IMG]
ChatterBox
Wizard
SupporterYes Pedro that would be right so putting this out there so others do not make same mistake and the first kit was not a brit part either.
they were $30 for the kit, the TWR kit was $40 and is the one to get and have seen some kits on ebay for a lot cheaper but stayed away from those.
disco seriesII mods so far:-bullbar,hyd winch,
detriot locker,lsd front,C.D.L kit,chipped and bigger intercooler,2" lift,rock sliders, lsd in transfer case, modified auto trans.
In the event of nuclear war,Disregard this message
AT RESTAllmakes sources some of their parts from the same manufacturers of Britpart parts. TRW are now made in Taiwan, but in saying that they would have to meet TRW's standards.Originally Posted by stevo
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks