D2a TD5 - no speed signal

Originally Posted by
Werdenfelser
I have this fault, no effects on Speedo, no Amigos, no effects on ABS, HDC or CC.
But: Amber ACE Light.
Stored Fault „Road Speed Signal Missing“ at ACE.
D2 TD5 Automatik with 265/75 and obviously working Hunter Di unit.
Where should I start to look for a fault? What do you think?
Check your rear axle ABS cable plug and socket connectors are clean and dry, and that the cables are all secured and not ‘flopping’ about. I wrapped some electrical tape around my left rear connector because the plug was a little loose in the socket. It has been all good now for a couple of years. Also the Hunter DI installation instructions are a little cryptic when it comes to working out which wires to use. Which colour wires on the Hunter unit have you used for signal in and signal out?
LROCV member #131
1999 build D2 TD5 Auto, Mantec snorkel, 2" LRA spring lift, ARB on board air, Ashcroft ATB, CMM air ram CDL shifter, swag & gold pans ....
Bookmarks