Page 1 of 5 123 ... LastLast
Results 1 to 10 of 47

Thread: Mixing engine oils?

  1. #1
    Join Date
    May 2015
    Location
    Williamstown, Victoria
    Posts
    3,248
    Total Downloaded
    0

    Mixing engine oils?

    I think it would be ok to mix Nulon diesel fully synthetic with Penrite diesel semi synthetic oil. Is it? Just making sure.
    I'm gearing up for the service.

    Thanks

    Bo
    D2a Td5 Manual, Chawton White. aka "Daisy"
    Build date 11th Oct 2003
    Freelander 2 2011, manual, the daughter calls it Perri
    Before I had a Land Rover I did not have any torque wrenches. Now I have three.
    LROCV #1410

  2. #2
    Join Date
    Jul 2014
    Location
    west of Transylvania
    Posts
    3,783
    Total Downloaded
    0
    IMO better not mix fully with semi, especially not different brands.... though if you mean drop one entirely and put the other no probs
    Discovery Td5 (2000), manual, tuned

  3. #3
    Join Date
    Jan 1970
    Location
    Free Again Thanks Dan
    Posts
    10,150
    Total Downloaded
    0
    Quote Originally Posted by sierrafery View Post
    IMO better not mix fully with semi, especially not different brands.... though if you mean drop one entirely and put the other no probs
    X2 No .
    Oh a Simple Google got this for you
    What Happens if You Mix Regular and Synthetic Oil?

  4. #4
    Join Date
    May 2015
    Location
    Williamstown, Victoria
    Posts
    3,248
    Total Downloaded
    0
    Quote Originally Posted by rangieman View Post
    X2 No .
    Oh a Simple Google got this for you
    What Happens if You Mix Regular and Synthetic Oil?
    Yeah but I looked for semi synthetic mixed with fully synthetic.
    Your google found Regular ie. mineral and synthetic.

    Cheers

    Bo
    D2a Td5 Manual, Chawton White. aka "Daisy"
    Build date 11th Oct 2003
    Freelander 2 2011, manual, the daughter calls it Perri
    Before I had a Land Rover I did not have any torque wrenches. Now I have three.
    LROCV #1410

  5. #5
    Join Date
    Jan 1970
    Location
    Free Again Thanks Dan
    Posts
    10,150
    Total Downloaded
    0
    Quote Originally Posted by Bohica View Post
    Yeah but I looked for semi synthetic mixed with fully synthetic.
    Your google found Regular ie. mineral and synthetic.

    Cheers

    Bo
    You asked and you got answered , It`s your car do what you want ,
    No more from me then good luck

  6. #6
    Join Date
    Jan 1970
    Location
    NSW far north coast
    Posts
    17,285
    Total Downloaded
    0
    The base oils aren't the issue, it's the dilution of the additive package that's a potential problem.

    In real world use you'll probably find no issue at all, but an engine oil is a finely balanced blend of base oils and additives, with the additive package accounting for up to 25% by volume of the oil.
    In some ways you could view it that the base oils are there merely as a carrier for the additive package. The mix of additives provide a lot of the Extreme Pressure (EP) and Anti Wear (AW) duties, anti scuff resistance, anti-oxidation duty, detergent and dispersant properties, etc.

    Put it this way, the resulting blend isn't going to start bubbling and frothing and smoking, nor is it going to suddenly breakdown and become like water, but you are potentially diluting the resulting additives which may or may not be similar and in similar ratios.
    It all depends who Nulon buy their add package through and then, which one they are using in that particular oil.
    Penrite have (or at least had) a very strong relationship with Lubrizol.

    I wouldn't sweat it too much if they meet the same specs and you aren't going to be towing a 32' monster van in 40*+ temps off road in low low while rock hopping.

  7. #7
    Join Date
    May 2015
    Location
    Williamstown, Victoria
    Posts
    3,248
    Total Downloaded
    0
    So it's out with the magnatec and in with the Nulon Fully Synthetic

    https://www.autobarn.com.au/full-syn...engine-oil-10l

    Cheers

    Bo
    D2a Td5 Manual, Chawton White. aka "Daisy"
    Build date 11th Oct 2003
    Freelander 2 2011, manual, the daughter calls it Perri
    Before I had a Land Rover I did not have any torque wrenches. Now I have three.
    LROCV #1410

  8. #8
    Join Date
    Oct 2007
    Location
    Wantabadgery, N.S.W.
    Posts
    2,742
    Total Downloaded
    0
    Very good to see Rick 130 back on deck. I hope you've been ok Rick.
    Don.

  9. #9
    Join Date
    Jan 2013
    Location
    WA
    Posts
    324
    Total Downloaded
    0
    value for money and high quality product, I couldn't top it.
    DELVAC 1 ESP 5W-40
    Cheers tt




    D2 2004 TD5 Classic

    --------------------------------------

  10. #10
    Join Date
    Sep 2009
    Location
    Brisbane
    Posts
    1,317
    Total Downloaded
    0
    Semi synthetic is up to 30% synthetic, so at least 70% mineral.

Page 1 of 5 123 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!