Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: TD5 Squeak...Intermittent

  1. 8th November 2016, 07:10 PM #1
    John_D4's Avatar
    John_D4
    John_D4 is offline ChatterBox Subscriber
    Join Date
    Mar 2016
    Location
    Adelaide
    Posts
    2,070
    Total Downloaded
    0

    TD5 Squeak...Intermittent

    I'll try to explain best I can! Developed a strange squeak the other day while highway driving.

    Sounds like it comes from the front end, sounds in pitch like a fan belt, but I've had squeaky fan belts before, it's not 'tied' to engine revs, cold starts or being stationary.

    Best I can describe it's audible above the td5 engine at 2/3000revs, mainly when I go around a roundabout and accelerate. Lasts about 30 secs. Does happen intermittently at other times, but mainly when turning and accelerating.

    The other day I came out of a steep uphill driveway & turned left onto the road with the window down, sounded a bit like a wheel bearing (squeak....squeak...slow down with me slowing down, faster with me at walking speed...then stops after 100m or so)

    What do u think??
    "Land Rover - making mechanics out of everyday motorists for nearly 70 years"
    Reply With Quote Reply With Quote
  2. 8th November 2016, 07:18 PM #2
    Pedro_The_Swift's Avatar
    Pedro_The_Swift
    Pedro_The_Swift is offline The MOD Father
    Join Date
    May 2003
    Location
    On The Road
    Posts
    30,031
    Total Downloaded
    0
    How long since you've checked that front propshaft?
    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!

    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]
    Reply With Quote Reply With Quote
  3. 8th November 2016, 07:25 PM #3
    LandyAndy's Avatar
    LandyAndy
    LandyAndy is offline RoverLord Gold Subscriber
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    The front driveshaft double cadagan joint.Dont leave it too long it can cause a big heap of damage if and when it lets go at speed.
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post
    Reply With Quote Reply With Quote
  4. 8th November 2016, 07:33 PM #4
    Outback 1
    Outback 1 is offline ChatterBox Supporter
    Join Date
    Sep 2007
    Location
    Bairnsdale enjoying the rural view no rooftops to see here
    Posts
    2,450
    Total Downloaded
    0
    x3 for the driveshaft
    have a good one :D ken :wasntme:
    MY07 L320 RANGE ROVER SPORT MORE GOODNESS TO COME
    MY03 D2A TD5 EXTRA GOODIE ENHANCED :D now parting from life
    1996 D1 300TDI GONE
    08 ford ranger c/c
    WRECKING DISCOVERY 2
    PM ME FOR WHAT YOU ARE LOOKING FOR
    Reply With Quote Reply With Quote
  5. 8th November 2016, 09:15 PM #5
    John_D4's Avatar
    John_D4
    John_D4 is offline ChatterBox Subscriber
    Join Date
    Mar 2016
    Location
    Adelaide
    Posts
    2,070
    Total Downloaded
    0
    Right. Thanks a lot guys, I'll get into that in next couple of days.

    Ur legends TD5 Squeak...Intermittent
    "Land Rover - making mechanics out of everyday motorists for nearly 70 years"
    Reply With Quote Reply With Quote
  6. 9th November 2016, 05:38 AM #6
    justinc's Avatar
    justinc
    justinc is offline Swaggie Vendor
    Join Date
    Aug 2006
    Location
    Kingston, Tassie, OZ.
    Posts
    13,728
    Total Downloaded
    0
    😮 ^^ don't keep driving it!!!

    Jc
    The Isuzu 110. Solid and as dependable as a rock, coming soon with auto box😊
    The Range Rover L322 4.4.TTDV8 ....probably won't bother with the remap..😈
    Reply With Quote Reply With Quote
  7. 9th November 2016, 06:52 AM #7
    John_D4's Avatar
    John_D4
    John_D4 is offline ChatterBox Subscriber
    Join Date
    Mar 2016
    Location
    Adelaide
    Posts
    2,070
    Total Downloaded
    0
    Gotcha. Check bolts & grease or replace?
    "Land Rover - making mechanics out of everyday motorists for nearly 70 years"
    Reply With Quote Reply With Quote
  8. 9th November 2016, 07:46 AM #8
    discorevy
    discorevy is offline ChatterBox Subscriber
    Join Date
    Nov 2014
    Location
    Nirvana near Albany W.A.
    Posts
    2,489
    Total Downloaded
    0
    Check the uni joints for rusty , shiney , or broken cups , see if you have any play , it more than likely needs uni joints , possibly a ball kit as well , if your not familiar with replacing universal joints , then would be easier to just get a replacement or take to a drive line specialist, but as mentioned, don't drive it , but if you need the vehicle, and you have a centre diff lock you can remove the shaft , lock the diff and drive until replacement, just be aware it'll feel different as it's now a rear wheel drive
    Reply With Quote Reply With Quote
  9. 9th November 2016, 07:58 AM #9
    Pedro_The_Swift's Avatar
    Pedro_The_Swift
    Pedro_The_Swift is offline The MOD Father
    Join Date
    May 2003
    Location
    On The Road
    Posts
    30,031
    Total Downloaded
    0
    There is a ****load of info in here about these--
    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!

    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]
    Reply With Quote Reply With Quote
  10. 9th November 2016, 08:05 AM #10
    Bohica's Avatar
    Bohica
    Bohica is offline YarnMaster Subscriber
    Join Date
    May 2015
    Location
    Williamstown, Victoria
    Posts
    3,248
    Total Downloaded
    0
    Quote Originally Posted by discorevy View Post
    .... if your not familiar with replacing universal joints.....
    Try this
    www.discovery2.co.uk / Workshop :- front and Rear propshaft
    D2a Td5 Manual, Chawton White. aka "Daisy"
    Build date 11th Oct 2003
    Freelander 2 2011, manual, the daughter calls it Perri
    Before I had a Land Rover I did not have any torque wrenches. Now I have three.
    LROCV #1410
    Reply With Quote Reply With Quote
Page 1 of 2 12 LastLast
« Steering Wheel Cover | Bonnet release adjustment? »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!