ok, so lst weekend i decided to finally replace my TD5 engine mounts.
After reading how to replace, the procedure was to remove or loosen the fuel cooler to get to the engine mount on that side.
Well i didn't do anything to mine, i was able to get an 18mm socket onto the top eng mount nut with a ratchet facing back towards the firewall, got a bar & levered the ratchet off the inlet manifold to crack the nut.
Got the missus to hold the other 2 eng mount to body bolts from the top with a 15mm long wobbly extension while i zapped the nuts off from underneath.

loosened the passenger side nuts & bolts but left them done up, i used an eng crane to 1st lift drivers side, the mount will come out from underneath on the inlet manifold side. sat new mount in & done bolts/ nuts up a few threads then changed exhaust side which is easy from the top.
when both mounts are in place , tightened all the bolts/nuts up & done..

Then i done the option B on the ABS, easy enough & no more 3 amigo's now & then...