Thread: Ultraflex 4x4 - Headlight Conversion

Originally Posted by ************

....
The rest do not comply.
They just scatter light from the reflector.

Read the thread, follow the links .. not all 'the other's' scatter light wildly.

There are a few known brands with the appropriate shielding over the chip to correctly distribute the light.
Those other brands may or may not have ECE compliance, but I doubt it'll far off coming soon.

Originally Posted by ************

The LED inserts you have shown from eBay will just get you booked.
If you want inserts that comply and are H4 then you need to buy the IPF units.
Either the 341 HLB
or
the 141 HLB
The rest do not comply.
They just scatter light from the reflector.

I don't really care. I won't be using them.
The purpose of my post was to compare the light output. Did you read the question? Well, do you know the lumen output of a halogen?

Originally Posted by lyhoon94

I've had the ultraflexes on for a year or so. Throws great light. Has a good quality feel to them and works as advertised.

I can't speak for the metal plate that houses the headlight as I broke mine when folding them for installation (posted flat, to be foldered by owner). My options were to order another set of plates and pay for them plus shipping or get it laser cut locally for much less.

As a result, fitment is a bit loose but nothing some tape couldn't fix (until I get around to drilling the light and the plate then screwing them together)

these go out pre-folded now and have done ever since you had an issue folding.

Originally Posted by ************

these go out pre-folded now and have done ever since you had an issue folding.

Would you sell them seperately?

What would a pair set me back with postage to Perth these days?

I have no stock left at the moment .. as I've had a lot of "anti people" saying my products are ugly .. suck etc.
So I've let stock run out.
I might have one plate left and for you I'll send it to you .. for $35 + post ..
let me check the remaining plate out and if issues I'll let you know.
It is a V3 plate .. bit different than yours.

From memory I did offer you another replacement for same money at the time .

Originally Posted by ************

I have no stock left at the moment .. as I've had a lot of "anti people" saying my products are ugly .. suck etc.
So I've let stock run out.
I might have one plate left and for you I'll send it to you .. for $35 + post ..
let me check the remaining plate out and if issues I'll let you know.
It is a V3 plate .. bit different than yours.

From memory I did offer you another replacement for same money at the time .

Hi Garret. This V3 plate, are there any pics up of this one? Does it look visually any different, or is it just a better fit or something?

Thanks,
Cam

Originally Posted by ozscott

Here is a thread I started not long ago..spoke to the guy and the lights are marked with relevant approval. I asked him a lot of questions and did research and was satisfied that they are very good lights and approved in Qld.

LED Headlights

Cheers

Hi, did you end up purchasing? I have been looking at his products would be interested to know how you like it.