If it works it works. Form follows function. I reckon those zip ties would last for at least a couple of....seconds. cheers
Pinched these pics form Aulro facebook.
but some interesting mods.
Ist mod Dual battery
DUEL BAT.JPG
then alternator upgrade to handle the dual battery and accessories.
alt.JPG
After fitment of a heavy bar and winch you may want to upgrade the front springs.
springs.JPG
Forget the Bendix, get your self good stopping power with these renewal eco friendly brake pads
brake pads.JPG
Then the important suspension lift.
suspension lift.JPG.
Next mod to consider is doing an EGR detete.
EGR delete.JPG
Cranked radius arms for your new lift.
adjustable radiaus.JPG
Rear end mod
adj trailing.JPG
If it works it works. Form follows function. I reckon those zip ties would last for at least a couple of....seconds. cheers
I need to book for the dentist tomorrow, could not find some of my teethThanks for uploading these great mods
Roverlord, you may be in trouble.
You have copied all these items from the "Standard upgrade Manual for Doomadgee Backyard Workshops".
Pretty sure it's Copyrighted.
Don't know why the wire door hinges aren't displayed?
Jonesfam
Great mods!!
They use pine block as brake pads on the cable cars in San Fransisco. They need to be replaced every 2 to 4 days. The pads push on the rails so harder pads will just wear out the rails.
D2a Td5 Manual, Chawton White. aka "Daisy"
Build date 11th Oct 2003
Freelander 2 2011, manual, the daughter calls it Perri
Before I had a Land Rover I did not have any torque wrenches. Now I have three.
LROCV #1410
D2a Td5 Manual, Chawton White. aka "Daisy"
Build date 11th Oct 2003
Freelander 2 2011, manual, the daughter calls it Perri
Before I had a Land Rover I did not have any torque wrenches. Now I have three.
LROCV #1410
When I broke the diff ball joint mount on my 77 RRC, I held it together with a couple of ratchet straps.
That got me off Rainbow Beach and back to Buderim where we pulled the back axle and welded it.
Regards Philip A
btw that “fabricated “ manifold is for a Mitsubishi Cordia turbo. My son bought a similar but better made steam pipe one and I made the bloody thing fit. It was impossible to reach one bolt on the flange so I had a bolt welded in .
Will you be putting together and selling any kits for these mods. Could be useful to chuck some in the outback spares box for going away.
2024 RRS on the road
2011 D4 3.0 in the drive way
1999 D2 V8, in heaven
1984 RRC, in hell
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks