I accessed the drain ends at the rear corners of the car hidden by the bumper. Luckily my steel bar made that access simple.
I put the front up on ramps and poured water into the SR channels. Flows through freely. Poured some warm soapy water through anyway just to clean them a bit.
I poured a bit under the top windscreen seal on the PS where the leak is. Very quickly dripped to PS floor. So that is the leak - not the SR.
The boys didnt do much of a job with that screen. So I dried it in the sun and have pumped some silicon into that corner under the seal.
See how that goes - if it still leaks I will take it back to the shop.
At least I now know that the SR and drains are ok.
D2a Td5 Manual, Chawton White. aka "Daisy"
Build date 11th Oct 2003
Freelander 2 2011, manual, the daughter calls it Perri
Before I had a Land Rover I did not have any torque wrenches. Now I have three.
LROCV #1410
| Search AULRO.com ONLY! | 
    Search All the Web! | 
  
|---|
| 
 | 
 | 
Bookmarks