Drill a small hole in the back corner below the gutter, drop down internally to lower grommet at tail light.
Will look tidy and neat.
As the title suggests, does anyone have some rear work lights mounted on their disco?
I've got left over unused led lights from the old dual cab i want to put on the rear gutters just above the door.
I'm a little unsure how to get the wires into the cab though? This stuff was easy on a dual cab. Plus I'm stuck at work (thanks covid) so can't simply go out to the shed and look.
Any hot tips from anyone who has something similar? Ide like to avoid drilling holes in the roof but if thats the only way then so be it
Drill a small hole in the back corner below the gutter, drop down internally to lower grommet at tail light.
Will look tidy and neat.
Why not simply turn the rear interior light on![]()
You only get one shot at life, Aim well
2004 D2 "S" V8 auto, with a few Mods gone
2007 79 Series Landcruiser V8 Ute, With a few Mods.
4.6m Quintrex boat
20' Jayco Expanda caravan gone
Mine are mounted on the cargo rack and have the cable run down one leg, run along the gutter to the front driver side and under the a pillar cover into the engine bay where the relay is.
Initially I was going to do the same, In the ended I did this as I didnt want to drill the body. The cable runs under the door behind the tyre.
IMG20200829124815.jpg
2003 D2a TD5 Auto
1960 Series 2 Petrol
| Search AULRO.com ONLY! | 
    Search All the Web! | 
  
|---|
| 
 | 
 | 
Bookmarks