Thread: Chimes Location

Originally Posted by FNQLR

Put it in locked cdl.
turn off engine.
re start engine
traction control is now off.

I thought this is how one turns it off?
dash lights stay on - TC warning and something else - I forget
The beeper even beeps to let you know.

Don’t even think it needs CDL locked as my switch is faulty so it’s disconnected for the moment, but I would have to check.

Originally Posted by Tins

Don’t even think it needs CDL locked as my switch is faulty so it’s disconnected for the moment, but I would have to check.

I drove around for a few weeks without a rear propshaft - just high range and cdl engaged.

The tc was disabled the whole time. LH front wheel would spin with the lightest throttle.

Maybe it's either Low range or CDL to disable?

Originally Posted by FNQLR

I drove around for a few weeks without a rear propshaft - just high range and cdl engaged.

The tc was disabled the whole time. LH front wheel would spin with the lightest throttle.

Maybe it's either Low range or CDL to disable?

Drove mine for weeks with no front shaft, CDL engaged. No lights. Didn't go into low though... Something else to test.

Originally Posted by Tins

Drove mine for weeks with no front shaft, CDL engaged. No lights. ...

As long as your CDL switch doesnt work the ECU would not know if it's locked or not hence no reaction to it... or if you replaced the SLABS ECU with one out of a facelift cos those were uprated to not disable the TC when CDL is locked as to work together

Originally Posted by FNQLR

I drove around for a few weeks without a rear propshaft - just high range and cdl engaged.

The tc was disabled the whole time. LH front wheel would spin with the lightest throttle.

Maybe it's either Low range or CDL to disable?

I drove mine to Tuncurry and back, around 2000 km round trip, without a rear tailshaft
and last year half way across the Simpson desert with out a rear tailshaft.

Whether or not TC was working I have no idea, but there were no unusual chimes or dash lights on.

The week spent crossing the desert the CDL was locked the whole time.

Now we have had this conversation I am going to take note. Will be on the Simpson Desert again in about 17 days.

I will report back on my findings.

Originally Posted by d2dave

I drove mine to Tuncurry and back, around 2000 km round trip, without a rear tailshaft
and last year half way across the Simpson desert with out a rear tailshaft.

Whether or not TC was working I have no idea, but there were no unusual chimes or dash lights on.

The week spent crossing the desert the CDL was locked the whole time.

Now we have had this conversation I am going to take note. Will be on the Simpson Desert again in about 17 days.

I will report back on my findings.

Yours won't turn off, Dave. It's an update.

Originally Posted by V8Ian

Yours won't turn off, Dave. It's an update.

I can't turn it off per se, however I can make it inactive.

Originally Posted by d2dave

I can't turn it off per se, however I can make it inactive.

If your's is facelift you can't do anything to the TC's automatic behaviour unless you replaced the SLABS ECU with earlyer modell only then the CDL disables it if it's in locked position while the ignition is turned on that's all.