-
8th January 2008, 08:39 PM
#1
Factory CD removal D2
Hi guys, any shortcuts to taking out the factory din cd player without going to LR for the special removal tools ??
-
8th January 2008, 08:46 PM
#2
If y cut the ends off a coat hanger to make 2x U shapped bits of wire, and stick these into the holes in face of the head unit on either side. This will unlock the headunit. If you can jam the wire into the holes by using the shape of the wire, or by squeezing towards the centre, then you should be able to start pulling the headunit out.
hmmm, thats for the 1.5din at least.
Cheers
Slunnie
~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~
-
8th January 2008, 08:48 PM
#3
cheers, mine is 1.5 din, so i will go try that in the morning.
i made a guage mount that will fit over the radio vent and need to get the wires up there somehow. hoping theres some light at the end of the tunnel behind when i take out the radio 
will post some pics when its done, made it out of an old plastic cupboard tray and some mdf
-
9th January 2008, 02:28 AM
#4
Rosscoe - if you can't get it out yourself using the bent coathanger as Slunnie suggested (I couldn't get mine out this way - but that's probably just me), go to any local car stereo shop / installer. Don't know who you've got over there, but anyone like "Audiocom" or "Strathfield" (these are the common ones in the West). They'll have the required tools and their installers will be able to pop the head unit out for you in a matter of seconds. Local shop here didn't even charge me to take mine out - but then again I had just purchased a bit of gear from them.
Cheers ............. BM
Cheers .........
BMKAL

Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks