Thread: Dobinsons Shocks, who uses them?

Only ever used Billies untill just recentley, when on a recomendation from

a mate went and spoke to Martin at Dobsons Narrellan, he fixed me up

with a set of Dobsons 2" lift coils and shocks and I can say there as good

as the Billies if not better it was a bit of stuffing around as I had to weigh

the axles empty then agian when loaded but the end result is well worth it

Originally Posted by Slunnie

Ah yes of course. Apart from the shock mount, that alters the ride height by about 10mm too I think. Actually, not wishing to sidetrack the thread.... do also run front springs that are ground at the bottom or D2 fronts?

Same springs as yours F & R, just the shock mounts that are D1.

Sorry Steve

Baz.

I use Dobs springs and shocks for fast off road use in my Discovery I...the truck is normally quite heaviliy loaded too.

After four years they are still behaiving very well and I wouldn't hesitate to replace them with another set of the same specs.

Money well spent IMHO.

Originally Posted by stevo68

Thanks Baz...am open to suggestions as well . Hey Slunnie...yep have emailed Shane as was in touch 5 mths ago when I was looking at doing something. Now it is weeks, so getting him to give me cost configurations on the dobinsons and bilsteins, but interested in peoples thoughts on who uses them and whats better/ worse/ indiffferent about those and any set ups.

Regards

Stevo

I went with Bilstien shocks, because when they do wear out you can have them rebuilt for the cost of a set of inferior shocks, and of course the Superb ride and handling of the Bilstiens, Regards Frank.