Results 1 to 5 of 5

Thread: D2 stock suspension heights

  1. 9th May 2009, 07:35 PM #1
    scarry's Avatar
    scarry
    scarry is offline Swaggie
    Join Date
    Apr 2008
    Location
    Brisbane,some of the time.
    Posts
    13,888
    Total Downloaded
    0

    D2 stock suspension heights

    Have a coiler D2,have a weeping front shock,will replace both with bilsteins .Need to know if front coils have sagged,as will replace with King springs at same time if needed.Have a TJM steel bar.

    Question is does anyone know what the dimensions from bottom of rim to underside of wheel arch flare is or should be ,standard or with set of standard kings fitted?

    Front is 690mm,Rear is 690mm as well with full tank of diesel,vehicle empty
    Thanks in advance
    Reply With Quote Reply With Quote
  2. 9th May 2009, 07:45 PM #2
    Slunnie's Avatar
    Slunnie
    Slunnie is offline Swaggie Gold Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    14,141
    Total Downloaded
    99.87 MB
    Quote Originally Posted by scarry View Post
    Have a coiler D2,have a weeping front shock,will replace both with bilsteins .Need to know if front coils have sagged,as will replace with King springs at same time if needed.Have a TJM steel bar.

    Question is does anyone know what the dimensions from bottom of rim to underside of wheel arch flare is or should be ,standard or with set of standard kings fitted?

    Front is 690mm,Rear is 690mm as well with full tank of diesel,vehicle empty
    Thanks in advance
    The normal measuring method is from the middle of the hub to the underside of the wheelarch - ie hub to guard measurement.

    Hub to guard specs are:
    Front 485 - 515mm, with almost all delivered at 485mm
    Rear coilers 468 - 498mm with almost all delivered at about 470mm.
    Cheers
    Slunnie


    ~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~
    Reply With Quote Reply With Quote
  3. 10th May 2009, 08:53 PM #3
    grover7488
    grover7488 is offline Master
    Join Date
    Jun 2008
    Posts
    369
    Total Downloaded
    0
    hi scarry

    mine is a 03 man V8 (70K km)and measured

    front:- DS715mm (495mm hub to gaurd) PS 705mm (485 HtG)
    rear:- DS710mm (490mm HtG) PS 700mm (480 HtG)

    before the 1st lift...........
    Reply With Quote Reply With Quote
  4. 10th May 2009, 09:13 PM #4
    Slunnie's Avatar
    Slunnie
    Slunnie is offline Swaggie Gold Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    14,141
    Total Downloaded
    99.87 MB
    Quote Originally Posted by grover7488 View Post
    hi scarry

    mine is a 03 man V8 (70K km)and measured

    front:- DS715mm (495mm hub to gaurd) PS 705mm (485 HtG)
    rear:- DS710mm (490mm HtG) PS 700mm (480 HtG)

    before the 1st lift...........
    Yours sits well. There are a few which are a bit higher like this.

    Are you coiled at the rear or SLS?
    Cheers
    Slunnie


    ~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~
    Reply With Quote Reply With Quote
  5. 10th May 2009, 10:06 PM #5
    grover7488
    grover7488 is offline Master
    Join Date
    Jun 2008
    Posts
    369
    Total Downloaded
    0
    Quote Originally Posted by Slunnie View Post
    Yours sits well.

    Maybe if it was 600mm

    Mine is a coiler had the SLS last time. Now if i can just get hold of some decent springs.......that aren't a pretty aqua color and get rid of these OME ones
    Reply With Quote Reply With Quote
« I have a ticking noise, is my CV on its way out? | new cylinder head for 2001 td5 »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!