Thread: Fire extinguisher

best to have it within reach, better to have a slight inconvenience than the major inconvenience of being trapped in your burning car and the fire extinguisher is in the back.....

I've got a 2kg dry powder extinguisher bolted to the floor in front of my passenger seat, theres enough give in the seatbelt that i can reach over, unclip it and grab it even if i cant get the sealtbelt undone

slightly different considering i only have a falcon, but thats what you should be aiming for

Originally Posted by Sprint

best to have it within reach, better to have a slight inconvenience than the major inconvenience of being trapped in your burning car and the fire extinguisher is in the back.....

I've got a 2kg dry powder extinguisher bolted to the floor in front of my passenger seat, theres enough give in the seatbelt that i can reach over, unclip it and grab it even if i cant get the sealtbelt undone

slightly different considering i only have a falcon, but thats what you should be aiming for

Thats what I think too.
Same as having a glass hammer/seat belt cutter on the cargo barrier,
hard to reach if (God forbid) upside down from front seat.

Cheers.

Originally Posted by Captcav

Yeah I just had a look at where you guys were talking about. What difficulties did you have with removing the back door lining in order to fix metal washers to the bottom of the screws. Also, did you have any movement from it in the bracket, it sitting very close to the back glass.

Captcav

I used threaded inserts that work a bit like a pop rivet, so no need to remove the trim. The 1kg extinguisher is well clear of the glass and hasn't moved.
Plan to mount the second extinguisher on the front of the passenger seat base one day.
Attachment 17523

Attachment 17524

Originally Posted by gazk

I used threaded inserts that work a bit like a pop rivet, so no need to remove the trim. The 1kg extinguisher is well clear of the glass and hasn't moved.
Plan to mount the second extinguisher on the front of the passenger seat base one day.
Attachment 17523

Attachment 17524

thats what Ive been looking at doing as when you take it off.. if you do
...its doesn't leave a hole but a nice threaded rivet

where do you get them and how do you install them

cheers

Originally Posted by cucinadio

thats what Ive been looking at doing as when you take it off.. if you do
...its doesn't leave a hole but a nice threaded rivet

where do you get them and how do you install them

cheers

they're called Rivnuts, Blknight has a how-to thread on here somewhere for people who dont have a proper rivnut setter

Originally Posted by alien d2

Thats what I think too.
Same as having a glass hammer/seat belt cutter on the cargo barrier,
hard to reach if (God forbid) upside down from front seat.

Cheers.

the glass hammer on the cargo barriers is more intended to allow people to break out of the rear of the vehicle if they get trapped behind the cargo barrier..... damned if i know why, its illegal to have a cargo barrier in place and carry people in the 3rd row seats

I bought a "Thread-sert" kit and extra "Brute rivet-nuts" in the USA a few years back but I expect you can get the same or similar from Blackwoods or a similiar nut/bolt/engineering supply company.

For a description and available sizes see: Thread-Sert® Threaded Fasteners- Zinc Plated on Automotive Fasteners Inc.


Really easy to fit - drill the required hole size, put an allen key head bolt through the required size hex mandrel, screw the insert onto the bolt below the mandrel, push the insert into the hole and tighten the bolt to expand the insert in the hole.

ok have read the spanner trick ...off to bunnings to get them in morn....you can get them there yhea?

cheers

Don't know if you have room on the seatbox in the D2 ...

there's also one mounted on the passengers side in my D1, easy to grab as you bail out.



Stevo

yep, they both get rotated in the bracket before every trip so the powder doesn't pack down.