In my experience..float sensors can be unreliable the older they get...A pressurized header tank is a difficult enviroment for them to operate in and if it's not a pressurized tank then coolant can be lost from the system and still leave the tank full.
My vote is with the "no moving parts" EngineSaver system which has proved it's worth so many times in all situations.
Hi fitted the engine saver about a week ago, easy to fit got a discount for mentioning where I heard about it and it works really well.
Set it up so the alarm was off at normal operating temp around the suburbs, had it set fairly fine it is sensitive enough to go off when I start to drive in steep hilly areas, had to move the dial a mm to the right and that is where I will leave it.
The only thing I was dissapointed in was the adhesive that holds the crontrol onto your steering column or where ever was not all that sticky.??
Then again it might be due to not cleaning the area? Might have been armour all or simular from the previous owner?? Might be my fault?
I feel a lot happier knowing I do not have to trust the computer to tell me if things get too hot or the coolant leaks.
Think the reason that other Land Rover drivers never wave is possibly due to the fact their spare time is taken up looking to see if any warning lights have come on. Maybe this will help to overcome this ??
Andrew![]()
So with the TM2 type attached to the block etc what is a safe temperature to set it at.
I had mine done by a LR repair place.
The display is mounted inside the dash under the main cover!
Not sure why they put it there?
The passenger can see it
I would probaly only be distracted if it were out.
The audible alarm is set on 100 C.
On a recent trip in a 36 degree day towing 1.5 T of camper trailer up a long hill , it got to 98 !!
Pete
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks