Thread: Rev Range TD5

I think they will do 4000 rpm, if not more.

Originally Posted by BigJon

I think they will do 4000 rpm, if not more.

So the limit @ 3000rpm could be indicating an issue elsewhere possibly...

Quite possibly.

Originally Posted by BigJon

Quite possibly.

I have the MAF left to try, ill give it a go

Are you sure your tacho is reading correctly?

Originally Posted by BigJon

Are you sure your tacho is reading correctly?

mmm...no, but Ive never come across it as a known issue....have you?

So your saying that it wont rev past an indicated 3k? Or power drops off after/at 3K? What does it idle at?
Mine will rev past 3K but I don't ever feel the need to it as makes good power below this engine speed. Mine idles at 700rpm and runs a needle width below 2500K @ 100kph on standard size wheels. Hope this helps.
Cheers Lionel

Originally Posted by Gold_TD5

So your saying that it wont rev past an indicated 3k? Or power drops off after/at 3K? What does it idle at?
Mine will rev past 3K but I don't ever feel the need to it as makes good power below this engine speed. Mine idles at 700rpm and runs a needle width below 2500K @ 100kph on standard size wheels. Hope this helps.
Cheers Lionel

mine does the same rev range but can be pushed to about 4k if pushing hard,