Page 1 of 4 123 ... LastLast
Results 1 to 10 of 32

Thread: Nanocom

  1. 18th July 2010, 12:42 PM #1
    trolley_73 Guest

    Question Nanocom

    G'day All, I am in a bit of a quandary. The rse end has dropped a bit (2" off the bump stops) on my D2, have done all the usual checks-
    Compressor operates
    Airbags are inflated and not leaking (only 20k old also)
    Have come to the conclusion that the ride height needs to be reset but there is noone within cooee (South Hedland) of me that has a Nanocom or any diagnostic equipment for Landy's. My quandary is this- I am maybe 3 months short of going the trade in routine for a new Fender which renders the Nano useless and about 2000Ks from the nearest Landy dealership. I know the Nano can adjust ride heights but have also come across the T4 handheld but am unsure whether this will do the adjustments I need or not? Any info would be greatly appreciated! The other issue I guess is that there does not appear to be any Nano's available Aus wide at the moment.
    Reply With Quote Reply With Quote
  2. 18th July 2010, 01:38 PM #2
    Koukandowie Brangus's Avatar
    Koukandowie Brangus
    Koukandowie Brangus is offline Master Gold Subscriber
    Join Date
    Nov 2006
    Location
    Alice Springs, Australia
    Posts
    360
    Total Downloaded
    0
    Quote Originally Posted by trolley_73 View Post
    G'day All, I am in a bit of a quandary. The rse end has dropped a bit (2" off the bump stops) on my D2, have done all the usual checks-
    Compressor operates
    Airbags are inflated and not leaking (only 20k old also)
    Have come to the conclusion that the ride height needs to be reset but there is noone within cooee (South Hedland) of me that has a Nanocom or any diagnostic equipment for Landy's. My quandary is this- I am maybe 3 months short of going the trade in routine for a new Fender which renders the Nano useless and about 2000Ks from the nearest Landy dealership. I know the Nano can adjust ride heights but have also come across the T4 handheld but am unsure whether this will do the adjustments I need or not? Any info would be greatly appreciated! The other issue I guess is that there does not appear to be any Nano's available Aus wide at the moment.
    Did you try Karcraft? i brought a nanocom from them last week and they had plenty in stock.
    Cheers from the Desert
    Rexy
    2000 130 TD5
    Oil in the Harness, suspension knock, transmission clunk, engine oil leaks, exhaust manifold leaks, centrifugal oil filter stripped bolts, a/c leaks, door leaks, wouldn't trade it for the world
    Reply With Quote Reply With Quote
  3. 18th July 2010, 03:01 PM #3
    trolley_73 Guest
    I havent looked that hard actually, just judging by some comments in other threads about the Nanocom that they were sold out. Cheers I might give em a bell 2moro morning.
    Reply With Quote Reply With Quote
  4. 18th July 2010, 03:13 PM #4
    Xtreme's Avatar
    Xtreme
    Xtreme is offline AT REST Subscriber
    Join Date
    Jan 1970
    Location
    Normanhurst, NSW
    Posts
    10,258
    Total Downloaded
    0
    Quote Originally Posted by TREX View Post
    Did you try Karcraft? i brought a nanocom from them last week and they had plenty in stock.
    Was that the new model as in pic below or did they still have stock of the old ones?



    Roger
    Reply With Quote Reply With Quote
  5. 18th July 2010, 03:14 PM #5
    Tombie Guest
    I would send Mattia an email at Nanocom.

    He has a new version out which "should" be multi vehicle capable.
    Reply With Quote Reply With Quote
  6. 18th July 2010, 05:14 PM #6
    Hendrik's Avatar
    Hendrik
    Hendrik is offline Wizard Supporter
    Join Date
    Jun 2008
    Location
    Milton, Queensland
    Posts
    1,320
    Total Downloaded
    0
    Has anyone found out if the price is similar to the old one?
    Discovery RockSliders
    https://www.aulro.com/afvb/the-veran...ies-1-2-a.html
    Reply With Quote Reply With Quote
  7. 18th July 2010, 05:57 PM #7
    trolley_73 Guest
    I have emailed Nanacom this arvo, hoping it is a similar price and also hoping it will do the newer models also.
    Reply With Quote Reply With Quote
  8. 19th July 2010, 07:28 AM #8
    DougLD Guest
    Hi All
    Try this link google can translate it it gives a bit more info on the new one about to be released would love to wait for it but i think that i will buy the old model as i have a TD5 and it seems to do everting that i require. Google Translate
    Reply With Quote Reply With Quote
  9. 19th July 2010, 10:40 AM #9
    trolley_73 Guest
    Well, the Nanocom has been ordered from Karcraft and is being slipped into an express post bag as I type. At least there will be one in Hedland from now on if anyone needs it passing thru town. Still waiting on more info about the evolution model but I need the Nano now so have bitten the bullet. Looking forward to more than 2 inches of suspension! The wife wants a few more inches too lol!
    Reply With Quote Reply With Quote
  10. 20th July 2010, 07:30 AM #10
    trog
    trog is offline ChatterBox
    Join Date
    Feb 2007
    Posts
    2,382
    Total Downloaded
    0
    being technially and computer useless and with the td5 disco up on a hoist in kununarra would one of the units be able to diagnose and possibbly provide a solution to the engine not firing? currently i am relying on possible solutions provided by the mechanics in brisbane and the parts sent up that they think might do the job. as well would one of these have to interface with any other computer as the mechanic here hasnt one to suit the landy? TIA
    Reply With Quote Reply With Quote
Page 1 of 4 123 ... LastLast
« I cant get rid of the bloody ding ding!! | Swiftcomm open source diagnostics »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!