Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: nanocom 1 how to?

  1. 10th November 2011, 02:23 AM #1
    mrx7 Guest

    nanocom 1 how to?

    on a nanocom 1 on a 2001 td5 cant get srs lights out any help available pls .its sending me mad
    Reply With Quote Reply With Quote
  2. 11th November 2011, 09:07 AM #2
    mturri's Avatar
    mturri
    mturri is offline Master Supporter
    Join Date
    Mar 2010
    Location
    Patagonia
    Posts
    124
    Total Downloaded
    0
    What firmware is your Nano mk1 on? Need Rev 2.06 to be able to access the SRS ECU.

    Rgds
    Matt
    Reply With Quote Reply With Quote
  3. 11th November 2011, 03:22 PM #3
    gazk's Avatar
    gazk
    gazk is offline Master
    Join Date
    Dec 2007
    Location
    Cambewarra, NSW
    Posts
    517
    Total Downloaded
    0
    Quote Originally Posted by mturri View Post
    What firmware is your Nano mk1 on? Need Rev 2.06 to be able to access the SRS ECU.

    Rgds
    Matt
    Or better still - Rev 2.07
    Reply With Quote Reply With Quote
  4. 11th November 2011, 05:13 PM #4
    mrx7 Guest
    2.06 so hows it done then
    Reply With Quote Reply With Quote
  5. 11th November 2011, 08:04 PM #5
    mturri's Avatar
    mturri
    mturri is offline Master Supporter
    Join Date
    Mar 2010
    Location
    Patagonia
    Posts
    124
    Total Downloaded
    0
    Need a Nanocom Programmer in order to apply the latest upgrades. Either buy it from BBS or find who's got one in your area and volunteers to 'do you'...

    Raise a thread titled along these lines "Have Nano Mk1 need programmer to update - I'm in xxx area" and see what responses you get.

    Then just read SRS ECU fault codes. These are typically related to lack of continuity (aka 'open circuit'). With this info at hand should be able to find & fix the problem.

    Rgds
    Matt
    Reply With Quote Reply With Quote
  6. 11th November 2011, 09:01 PM #6
    OffTrack's Avatar
    OffTrack
    OffTrack is offline YarnMaster
    Join Date
    Feb 2011
    Location
    Brunswick, Victoria
    Posts
    3,778
    Total Downloaded
    0
    Or check this reply the other thread:

    http://www.aulro.com/afvb/showthread.php?p=1573442
    Reply With Quote Reply With Quote
  7. 16th November 2011, 03:28 PM #7
    mrx7 Guest

    2.05 not 2.06

    sorry ive got 2.05 not 2.06 got no hope til i upgrade yes/no?
    Reply With Quote Reply With Quote
  8. 16th November 2011, 08:34 PM #8
    mturri's Avatar
    mturri
    mturri is offline Master Supporter
    Join Date
    Mar 2010
    Location
    Patagonia
    Posts
    124
    Total Downloaded
    0
    NO
    Coverage for SRS / Autobox / Motronic (V8) was introduced with upgrade release 2.06

    Rgds
    Matt
    Reply With Quote Reply With Quote
  9. 20th November 2011, 12:27 PM #9
    mrx7 Guest

    Thumbs up

    horrah got 2.07 now fault found and soon to be fixed stuffed seat belt pretensioner causing open circuit thanks to all that helped
    mrx7
    Reply With Quote Reply With Quote
  10. 21st November 2011, 12:40 AM #10
    mturri's Avatar
    mturri
    mturri is offline Master Supporter
    Join Date
    Mar 2010
    Location
    Patagonia
    Posts
    124
    Total Downloaded
    0
    Seen this before, look for bad contact within the yellow connector underneath the seat (either C0252 or C0254 depending on side).

    Rgds
    Matt
    Reply With Quote Reply With Quote
Page 1 of 2 12 LastLast
« Nanocom Evo Mk2 and Mac OS X | Clearing Faults ? needed »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!