G'day all, I recently hooked up the nanocom 1 to my D2 td5 to see what codes had been logged,if any,and came across acceleration % in the ABS values section. I slowly pushed the loud peddle to the floor (eng. off) and the reading climbed steadily from go to woe but 86% was the end result at full noise. To me this would explain a very lack luster performance while making an overtaking maneuver, in particular, 5th gear,(manual box) at cruise speed. I checked for a means of adjustment by removing the TPS but found the unit is fixed. Any light shedding info would be much appreciated.