Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 34

Thread: chainsaw chain and sharpener

  1. #21
    Join Date
    Jan 1970
    Location
    NSW far north coast
    Posts
    17,285
    Total Downloaded
    0
    Quote Originally Posted by BMKal View Post
    Must be something in the air.

    SWMBO had me dropping a tree and cutting it up today as well. First time the saw has been used in over a year.

    And I had to sharpen the chain first - by hand with a new file and the saw in the bench vice in the shed. I'm definitely another believer in hand sharpening.
    I meant dragged the old clamp on bar filing guide out, I use a saw several times a week at this time of year but have mainly used a File-O-Plate for the last few years.

  2. #22
    Join Date
    Jul 2007
    Location
    North East Victoria
    Posts
    220
    Total Downloaded
    0
    Quote Originally Posted by LandyAndy View Post
    Dave
    This is the style sharpener.
    Chainsaw Chain Pro File & Guide Sharpener Suits Stihl - eBay Chainsaws, Outdoor Power Equipment, Gardening, Home. (end time 27-Jun-10 12:56:53 AEST)

    Rick
    the trick seems to set the lower setting to 0deg.File angle 25deg.
    works good.
    Always tempted to go back to hand sharpening.
    Andrew
    Have used one of these units (different brand) for years, and always seem to get a good edge.

  3. #23
    Join Date
    Jul 2009
    Location
    S.E.Qld
    Posts
    1,401
    Total Downloaded
    0
    I just bought an electric chain sharpener at ALDI. Do I use it on an oily chain, or do I degrease the chain first and use it dry,or do I use water?
    Thank you W.

  4. #24
    Join Date
    Jan 1970
    Location
    Wheelers Hill, Melbourne
    Posts
    4,085
    Total Downloaded
    0
    I can usually cut a load ( Landie Tray) with the one sharp chain, but if I hit the dirt I usually refile it with a hand file by eye, then put them on the 240v chinese grinder at home.
    Works for me
    I buy those Carlton chains on Ebay used once & about $5 each, then punch out a link & join up with an oregon chain spinner.
    Rather than sharpen twice by eye I would put another chain on thats been bench sharpened..
    Its not bad policy as I have about 5 bars, none worn out, some have cut 120 tonne now.- I burn about 7-10 tonne a year.
    Running a really sharp chain & keeping the oil up is the secret to long life bars.

  5. #25
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    18,616
    Total Downloaded
    0
    Any one used one of these sharpeners - were advertised on TV a few weeks back.

    Are they any good?

    PowerSharp sharpens chain on the saw, on the job, in seconds
    REMLR 243

    2007 Range Rover Sport TDV6
    1977 FC 101
    1976 Jaguar XJ12C
    1973 Haflinger AP700
    1971 Jaguar V12 E-Type Series 3 Roadster
    1957 Series 1 88"
    1957 Series 1 88" Station Wagon

  6. #26
    Join Date
    Jan 1970
    Location
    NSW far north coast
    Posts
    17,285
    Total Downloaded
    0
    Quote Originally Posted by garrycol View Post
    Any one used one of these sharpeners - were advertised on TV a few weeks back.

    Are they any good?

    PowerSharp sharpens chain on the saw, on the job, in seconds
    It's actually a complete chain and sharpening system and not compatible with a conventional chain.
    The cutters are totally different to a 'normal' chain.

    It's aimed at the homeowner/weekend warrior that isn't overly comfortable/competent sharpening a chain and so is a great idea.

    Here's a couple of threads, Fish usually calls a spade a damned shovel and there's some input from one of the Oregon engineers that designed it

    http://www.arboristsite.com/chainsaw/148391.htm

    http://www.arboristsite.com/chainsaw/159786.htm

  7. #27
    Join Date
    May 2009
    Location
    Tatura, Vic
    Posts
    6,336
    Total Downloaded
    0
    Quote Originally Posted by garrycol View Post
    Any one used one of these sharpeners - were advertised on TV a few weeks back.

    Are they any good?

    PowerSharp sharpens chain on the saw, on the job, in seconds
    I have'nt but when I am due for a new bar I will be getting one.

    Dave.

  8. #28
    Join Date
    May 2009
    Location
    Tatura, Vic
    Posts
    6,336
    Total Downloaded
    0
    Quote Originally Posted by BMKal View Post
    My Stihl uses the same size chain Dave.

    I also have the Granberg .................



    Don't use it very often, unless I'm feeling a bit lazy, as I find that I tend to over-sharpen the chain using this, and the chains do not last as long. Generally just stick with the hand file and jig.

    About the only chains that we can get from the local hardware are "Oregon" brand. I have found them OK, but haven't really had much opportunity to compare them with anything else.
    I have one of these kicking around the shed. I reckon they aren't much good.
    The old hand file works much better.

    I also have one of these which works ok but is slow.



    I have been using and sharpening chainsaws for 30 plus years with the last 21 years having a wood heater as the primary heating for my residence.

    I have tried many ways with success but found I could never get a chain to cut as well as shop sharpened one. This was until I purchased one of these. This sharpens as good as the shops due to it being the same, just a cheaper version.



    As for which chain to use I know a bloke who used to cut trees for a living and he would only use Stihl chain. He reckon the the others wore out faster.

    My self, I recently went to the local mower shop and purchased a new non genuine bar and chain package. When I fitted it to the saw the chain was binding. I was not happy so I took it back. I decided to go genuine and wear the extra cost so went to my Stihl dealer. Cost me $5 more!

    Dave.

  9. #29
    Join Date
    Jan 1970
    Location
    Wheelers Hill, Melbourne
    Posts
    4,085
    Total Downloaded
    0
    Quote Originally Posted by garrycol View Post
    Any one used one of these sharpeners - were advertised on TV a few weeks back.

    Are they any good?

    PowerSharp sharpens chain on the saw, on the job, in seconds
    This is a variation of the autosharp chainsaw of the 80's. Its a special chain that can be sharpened by lowering a grinding stone from above.
    It is very similar to racing chain. The problem is they dull 3 times quicker than normal chain, so dont last long.
    Good for the handyman for around the home.

  10. #30
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    18,616
    Total Downloaded
    0
    Quote Originally Posted by rick130 View Post
    It's aimed at the homeowner/weekend warrior that isn't overly comfortable/competent sharpening a chain and so is a great idea.
    Sounds like me
    REMLR 243

    2007 Range Rover Sport TDV6
    1977 FC 101
    1976 Jaguar XJ12C
    1973 Haflinger AP700
    1971 Jaguar V12 E-Type Series 3 Roadster
    1957 Series 1 88"
    1957 Series 1 88" Station Wagon

Page 3 of 4 FirstFirst 1234 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!