Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16

Thread: NSW vehicle registration

  1. #11
    Join Date
    May 2007
    Location
    Newcastle
    Posts
    878
    Total Downloaded
    0
    thanks for the replies guys. it is the rear passenger seats i've removed so technically it is now a 2 seater. Mayfield is close to where were going to go, so good choices there
    my missus got a job at williamtown, they going to put us up for 4 weeks first at either shoal ? bay or nelson bay, but were hoping to get in nearer the city, and hopefully a few pubs
    hopefully catch up with a few of you'se when we arrive.
    craig we should be right with those dates

  2. #12
    Join Date
    Apr 2008
    Location
    Near Seven Hills, Sydney
    Posts
    4,342
    Total Downloaded
    0
    Mine's a 9 seater (2 front, 3 middle, 4 sideways facing rear) as was my fathers both only ever has required annual inspections...but like John's, the number of seats isn't stated on the rego. And the 4 rears are never bolted in when taken for inspection and have no seatbelts

    bit off topic though, sorry...

  3. #13
    Join Date
    Jan 2009
    Location
    Springwood
    Posts
    161
    Total Downloaded
    0
    "The seats should have no splits cracks or tears.You are kidding, most mine vehicles would be in trouble"

    Thats why Repco sells seat covers. And jam sponge in the crack. Inspector can not remove seat covers

    "No cracks or bulls-eyes in the windscreen and other glass. For real, over here its as long as they are not in the drivers direct view"

    Is that just for Blue slip?
    As that is not the case for a Pink slip. You can have the passenger side full of holes. Although the rules could of changed....Again!

    At the end of the day the RTA have the most rediculous rules made up and leave you scratching your head over it.

    "and the tester in NOT allowed to poke anything through and corrosion to try and make a hole,if he does so,that is malicious damage."

    That is very true. But I was insructed by someone in the RTA technical department to poke a hole in a brake line so I could fail the vehicle. All because of their dumb nonsense rule book. I didn't, but I informed the owner.

    Its all down to the inspector. But remember the one who fails you the most is probably doing his job properly (even if it is annoying). But most are pretty fair. Oil leaks are always a favorite.

  4. #14
    Join Date
    Jan 2009
    Location
    Springwood
    Posts
    161
    Total Downloaded
    0
    "it is the rear passenger seats i've removed so technically it is now a 2 seater."

    I would be very cautious of that. They may cause you all sorts of greif down the road.
    If he marks it down as a two seater on the paper work then you later put the other seats in and wish to comply it may then require an engineers certificate which will then have to comply to todays safety requirements. I'm not 100% on that but very weary.

    I would keep the seat numbers as original sold new.

  5. #15
    Join Date
    Apr 2008
    Location
    Near Seven Hills, Sydney
    Posts
    4,342
    Total Downloaded
    0
    When you get over here, borrow some seats for the blue slip...

  6. #16
    Join Date
    Mar 2010
    Location
    Mudgee-ish
    Posts
    946
    Total Downloaded
    0
    It is legal to remove the passenger seats. Perhaps they are required to be in place for a blue slip inspection as the RTA have rules for vehicle inspections that are not law or legal requirements. However, all seat belts and anchorages must be in place and in good condition even with the seats removed. Not having them is a defect, 3 points off your licence and a big fine.

Page 2 of 2 FirstFirst 12

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!