Results 1 to 4 of 4

Thread: urgent help - disco1 alarm

  1. #1
    Join Date
    Apr 2007
    Location
    NW Tassie
    Posts
    1,884
    Total Downloaded
    0

    urgent help - disco1 alarm

    my disco 1 wouldnt open with the remote so I unlocked it with the key and now the bloody alarm keeps going off and it wont start. How do I disable the alarm until I sort my remote out.
    thanks
    blaze

  2. #2
    Join Date
    Jan 1970
    Location
    Somewhere else, QLD
    Posts
    1,863
    Total Downloaded
    0
    I can help if it's a one button alarm - under the glovebox, unplug the alarm harness and, using a wire a little bit thinner than a paperclip, jump the last two positions on the plug. ( # 5 & 6). You'll lose central locking but the engine will start.

    Two button alarm - search through the threads for 'alarm spider'. Once you find it, you can bypass it but you'll need to look at the wiring diagram.

  3. #3
    Join Date
    May 2009
    Location
    Tatura, Vic
    Posts
    6,336
    Total Downloaded
    0
    Sometimes mine won't open with remote. I go very close to the passenger side A pillar and it usually works. The antenna for the remote is located here.

    Dave.

  4. #4
    Join Date
    Apr 2007
    Location
    NW Tassie
    Posts
    1,884
    Total Downloaded
    0
    Thanks guys, had a frantic call to JC and got the scream shutup which allowed a bit of think time. Apart from not working, every time I went near the car it seamed to want to sream at me, did manage to shut up long enough to talk to justin, then manage to disconnect the siren without more screams. Ended up pushing the tang down on the battery so my thoughts at this point is it was a poor contact but will also replace the battery asap.
    thanks
    blaze

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!