Thread: Tool kit for car

Originally Posted by Ausfree

A roll of Duck tape can come in handy!!

'Duct' - Grey plastic tape that stretches and conforms. Very sticky, minimal creep when applied. Designed for HVAC fitters installind & joining air .... ducts....

Im planing on ordering one of these sockets to undo tail shaft bolts

eBay Australia: Buy new & used fashion, electronics & home d

anyone have one of them? Im also looking at ordering one of those viscous fan removal spanners 32mm-36mm. I know you get so much more room to work on things when you remove the fan!!!


Anyone keep the 2part putty that turns to steel?

Originally Posted by MR LR jnr.

2 x 9/16 (i'm pretty sure) combination spanners for the flanges on the tailshaft to take them off if need be

Correct. but not 'if', - 'when' the VC packs up and you need to remove the front prop shaft.

(assuming you don't transplant the 300's gearbox/LT230 ...)

Hi
i not long ago put a 200tdi in my classic best thing i ever did. let us know if you want any info regarding conversion.
cheers. jake

a good galvanized covered trailer to put every thing in

Originally Posted by richard4u2

a good galvanized covered trailer to put every thing in

With the lists some of these guys have you'd need it, all of dad's tols fit in a lunchbox thing, he was a Land Rover dealer and had every tool he ever needed on any car (including our veteran cars), if we went offroad he'd take extra but as an everyday tool kit he had enough i should pull it out and record whats in it

Originally Posted by richard4u2

a good galvanized covered trailer to put every thing in

I think im gonna have to buy a bigger tool bag

Originally Posted by 91ramjet

Hi
i not long ago put a 200tdi in my classic best thing i ever did. let us know if you want any info regarding conversion.
cheers. jake

I just started on the conversion, I bought a 1994 300tdi disco, Ive pulled the entire drive-line, fuel system, wiring loom and pretty much everything else I need from it, Ive cut the engine mounts off and now i'm in the process of trying to organsie all the parts, Ive got parts scattered everywhere. Cant bloody find anything!!!

If I run into any troubles I will yell out.

cheers Goran