Results 1 to 8 of 8

Thread: Fibreglass tube/pipe?

  1. #1
    Join Date
    Nov 2008
    Location
    Bruthen, Eastern Vic.
    Posts
    842
    Total Downloaded
    0

    Fibreglass tube/pipe?

    Hi all,

    Anyone know who sells fibreglass tube/pipe in small sizes?
    Looking for nom. 20mm and 40mm in 2m lengths.
    I have found commercial suppliers in US and China, they deal in lots of 1000.

    I am making a couple of vhf antennas, one for 2m/70cm amateur and one for CFA vhf frequencies.

    Antenna makers want a fortune for theirs, even with no antenna inside.

    Don't want to go down the sticky make it myself route unless I have to...

    Cheers,
    Terry
    80 109" 2.6 P ex Army GS, saved from the scrappie.
    95 300tdi 130 Single cab tray.
    2010 Guzzi 750

  2. #2
    Join Date
    Jun 2012
    Location
    Port Franklin
    Posts
    42
    Total Downloaded
    0

    Fibreglass tube/pipe?

    Hello
    There are telescopic out riggers for boats. Mine are 16 foot long and vary from 50mm. on bottom to about 15 mm. at tip. I can measure mine if you like. David

  3. #3
    Join Date
    Nov 2008
    Location
    Bruthen, Eastern Vic.
    Posts
    842
    Total Downloaded
    0
    Thanks David,

    Sounds like a solution, tapered is even better

    Where do you buy those?

    Terry
    80 109" 2.6 P ex Army GS, saved from the scrappie.
    95 300tdi 130 Single cab tray.
    2010 Guzzi 750

  4. #4
    51jay Guest
    blanks for making fishing rods might be useful too

  5. #5
    Join Date
    Apr 2009
    Location
    South Sydney
    Posts
    2,499
    Total Downloaded
    0
    This may be a totally stupid question, but would electrical conduit work? Unless of course it prevents signal getting out or something!!

  6. #6
    Join Date
    Nov 2008
    Location
    Bruthen, Eastern Vic.
    Posts
    842
    Total Downloaded
    0
    Yes PVC absorbs some (a lot) of the RF signal. That's why all commercial antennas are inside fibreglass radomes.

    Terry
    80 109" 2.6 P ex Army GS, saved from the scrappie.
    95 300tdi 130 Single cab tray.
    2010 Guzzi 750

  7. #7
    TonyC is offline Wizard Silver Subscriber
    Join Date
    Sep 2007
    Location
    NE Victoria
    Posts
    1,415
    Total Downloaded
    32.83 MB
    Hi Terry,
    Try Haverfords, I have a 9m one for VKS737 and 4 or 5m one for a sand flag.
    I can measure the sections if that is any help.

    Tony

    Telescopic Poles flag amatuer HAM radio antenna squid pole

  8. #8
    Join Date
    Nov 2008
    Location
    Bruthen, Eastern Vic.
    Posts
    842
    Total Downloaded
    0
    Thanks Tony,

    Another good clue.

    Boat spars and fishing poles - I would never have thought of either.

    Thanks guys, I will look into both.

    Terry
    80 109" 2.6 P ex Army GS, saved from the scrappie.
    95 300tdi 130 Single cab tray.
    2010 Guzzi 750

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!